This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
Struggling with a leaky washing machine? Don't despair! The Whirlpool Washer Tub Seal is here to save the day. Think of this as the secret weapon in your washer's arsenal. Nestled in the heart of your...
Ask our experts a question about this model and we'll get back to you as soon as possible!
28 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
June 13, 2024
After load complete light comes on and the red light to unlock it keeps running like humming if I turn the load a quarter turn it stops then humming again I have to unplug it
Please can you tell me why and the washer is level thank you please help it's not in the trouble shooting section
For model number NTW4519JW2
Hi Ed, thank you for contacting us. It appears that your washer may have a damaged control board, part number PS16744865, and you may need to replace it to fix the issue. Glad to be of assistance!
Why is my washer using hot water when it’s set to cold? I even tried “tap cold” option and still running hot.
For model number NTW4519JW2
Hi Roberta, thank you for the question. The water supply lines could be connected incorrectly behind the machine. You will need to disconnect the supply lines, run water into a bucket to confirm both hot and cold, then reconnect them to the appropriate connection behind the machine. If this is not the issue, we would recommend checking the water temperature selector switch, part number PS11731444. Good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Keith
February 5, 2025
water will not shut off with a small load of clothes.
For model number NTW4519JW2
Hello Keith, Thank you for writing. If the washer will not stop filling with water, the most likely culprit is a faulty water pressure switch. The Pressure Switch for this model is part of the Control Board. We hope this solves your problem!
After cycle is done and spinning complete the washer has a buzzing sound like it is turned on even tho load is done. I have it unplugged now because nothing changes this!
Washer is 1 1/2 yrs old.
For model number NTW4519JW2
Hello Gloria, thank you for reaching out. Based on the description that you have provided, it’s likely that a component such as the drain pump or inlet valve is stuck in the “on” position due to a relay issue on the control board. Sometimes, the control board can fail to signal these components to turn off, causing the buzzing sound even when the cycle is finished. Inspect the control board for any signs of burning or damage; if found, the board should be replaced to resolve the issue. The part number is PS16744865. We hope this information helps!
washes fine an when done sounds like water pump start running for no reason an have to unplug
For model number NTW4519JW2
Hi Dean, thank you for getting in touch. According to our research, the issue could be because of the water pressure switch or the water level sensor. When this sensor fails, it cannot detect that the water has already drained, causing the pump to run indefinitely as a safety measure. The pressure switch for your model is integrated into the main control board, part number PS16744865, and replacing it might fix the issue. We hope this solves your problem!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Removed center cap, loosened center nut, pry lightly up on center plate and tap center nut. Center plate comes loose, remove nut, remove center plate. Pry lock clip out and remove, remove screw with electric impact (screw drive will work, but slower), remove drive hub. Install new drive hub (be sure to check screw hole alignment), install and tighten screws (be sure to follow a skip pattern and bring it down even), install lock clip, install center plate, install and tighten nut, replace center cap. Done!
