The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
$51.13
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
This 240V/5400W heating element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current, causing the wire to heat up. The heat ...
$78.84
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
$58.59
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
This dryer drum roller kit is designed to restore smooth and quiet operation in a wide range of dryer models. It includes two drum rollers, four tri-rings, and one to two retaining washers, providing ...
$22.56
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.01
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
$29.80
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$63.92
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
If your dryer drum isn’t spinning, the motor might be the issue. This replacement motor works with many Whirlpool-brand dryers made before 1996 and comes with the pulley already attached. It powers th...
$143.77
In Stock
Order within the next 1 hr and 23 mins and your part ships today!
Questions And Answers for NED4655EW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mitchel
May 9, 2022
My dryer no longer heats, will not dry clothes.
For model number NED4655EW0
Hi Mitchel,
Thank you for your question. If your dryer is not heating, there are some parts that you will need to check to see which one is causing the issue. You will need to check the heating element, the thermal cut off kit, the cycling thermostat and the high limit thermostat. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Dryer stops after a few minutes,have to wait a bit before it will restart
For model number NED4655EW0
Hi Randy, thank you for reaching out. The problem seems to be with the Cycling Thermostat and you may need to replace it, the part number is PS11741405. If that does not help, we would recommend checking the Drive Motor, part number PS334304. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Thermal Fuze (3392519) blown. Have a replacement. What else should I check before I turn it on?
For model number NED4655EW0
Hello Chuck, thank you for your inquiry. We would recommend checking the wire harness regarding the thermal fuse. If the wire harness is not at fault, then you may need to replace the thermal fuse to fix the issue. The compatible thermal fuse for your model is part number PS11741460. We hope this solves your problem!
Dryer not getting hot enough to dry clothes.
The drum is rolling and when opening the door you fell some heat but clothes not drying. Turned dryer back on several times to attempt to dry the load. I even tried different settings with no change.
For model number NED4655EW0
Hello Richard, thank you for getting in touch. We would recommend cleaning the lint screen of the dryer. If the lint screen is clean and functioning properly, then you may need to check the cycling thermostat, part number PS11741405, to fix the issue. It monitors and regulates the temperature inside the dryer. We hope this solves your problem!
Clothes are being ripped i believe by the metal lint vent inside the dryer, it feels like there's some Sharp points protruding. Do you sell replacement vent/covers for this?
For model number NED4655EW0
Hello Jada,
Thank you for your question. The blower housing for the dryer is under part PS11746739 for your model, and the lint trap housing seal is under part PS11741506. We hope this helps.
To reach the heating element you only need to open the back cover of the dryer (about 8 nut-head screws). Remember to disconnect the power.
To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.
You can check the heating element with an ohm-meter or visually inspect it to see if the heating element spiral wire is broken.
Don't hurry to dispose the old element. My model includes a small electric safety part. You'll need to transfer it to the new heating element (that comes without it)..
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
The repair was easy. the most time consuming part was vacuuming the dust from the back of the Dryer, The repair required removing screw from the back panel of the dryer. Then removing screws from the heating element and unplugging the wires. The only moderately diffculy part was swapping the sensor form the old element.
