The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
This 240V/5400W heating element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current, causing the wire to heat up. The heat ...
This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
This dryer drum roller kit is designed to restore smooth and quiet operation in a wide range of dryer models. It includes two drum rollers, four tri-rings, and one to two retaining washers, providing ...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
If your dryer drum isn’t spinning, the motor might be the issue. This replacement motor works with many Whirlpool-brand dryers made before 1996 and comes with the pulley already attached. It powers th...
$143.77
In Stock
Questions And Answers for NED4500VQ0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
October 7, 2022
Dryer dose not heat what do I have to replace?
For model number NED4500VQ0
Hello Carol, thank you for your question. We have researched your model and found that the culprits of this issue can be multiple. The most probable culprit is the thermal cut-off kit, part number PS334299. If that does not take care of the issue, then the problem is most likely to be related to the dryer cycling thermostat, part number PS11741405. If you require assistance placing an order, please contact customer service. We hope that helps!
Do you guys sell the metal connectors for the two wires that attach to thermal fuse?
For model number NED4500VQ0
Hi Sienna, thank you for reaching out. We have researched and found that the connectors are not sold individually and you may need to order the thermal cut-off kit, part number PS334299, for the required parts. We hope this information is useful!
What screw thread are the screws that That Connect the power cord to the dryer 279393
For model number NED4500VQ0
Hi William, thank you for the great question. According to our research, the screws that connect the power cord of your model have right-hand thread direction. We hope this information is useful!
Was this helpful?
Thank you for voting!
David
December 20, 2023
Dryer will not heat. What should we be looking at?.We have already replaced Dryer High limit Thermostat and Dryer Cycle Thermostat. Please call or contact ASAP. Thank you
For model number NED4500VQ0
Hi David, thank you for contacting us. Since you have already replaced some of the most common parts that may cause this issue, we would recommend checking the heating element, part number PS334313. We hope this helps.
To reach the heating element you only need to open the back cover of the dryer (about 8 nut-head screws). Remember to disconnect the power.
To remove the heating element there are two small nut-head screws. Remove the two electric wires. Then you can pull the heating element away.
You can check the heating element with an ohm-meter or visually inspect it to see if the heating element spiral wire is broken.
Don't hurry to dispose the old element. My model includes a small electric safety part. You'll need to transfer it to the new heating element (that comes without it)..
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
The repair was easy. the most time consuming part was vacuuming the dust from the back of the Dryer, The repair required removing screw from the back panel of the dryer. Then removing screws from the heating element and unplugging the wires. The only moderately diffculy part was swapping the sensor form the old element.
