The Samsung Range Dual Surface Element Control Switch is a genuine and efficient solution to restore your Samsung Wall Oven to its optimal performance. As part of the assembly, this essential componen...
Experience superior functionality and added aesthetic appeal in your kitchen with the Samsung Range Main Glass Cooktop Assembly. This genuine OEM replacement part is designed to seamlessly fit and ble...
Update your Samsung kitchen appliances with this top-quality Range Convection Fan Motor Assembly. This essential component ensures convection cooking is smooth and effective in your Samsung Range, Wal...
Is your Samsung range not heating up like it used to? Our Samsung Range Surface Element Control Switch could be your solution. This authentic, OEM part has one job - to control the heat produced by yo...
Enhance the functionality of your Samsung Range, Samsung Microwave Oven Combo, Samsung Wall Oven, or Samsung Cooktop with the Samsung Thermostat, DE47-20037A. This high-quality, original Samsung part ...
Do you need to stabilize a wobbly Samsung kitchen appliance? Our Black Leveling Leg from Samsung is not only a robust, original part but also the perfect answer to your misalignment problem! Simple ...
Does your Samsung oven struggle in evenly distributing heat? We have just the right solution for you. Our Samsung Convection Reverse Fan Motor, a top-quality product that boasts impeccable constructio...
Presenting the Convection Fan Motor - Lower, exclusively designed for your Samsung Range, Samsung Wall Oven, and Samsung Microwave Oven Combo by the renowned brand, Samsung. This high-end part ensures...
Upgrade your kitchen appliances with the Samsung HEATER RADIANT-DUAL engineered to deliver peak performance. This essential component is specifically designed for your Samsung Range, Samsung Microwave...
Introducing the Samsung Oven Temperature Sensor! An essential component specifically designed to steadfastly monitor and regulate the temperature in your Samsung Range, Microwave Oven Combo, and Wall ...
Enhance the efficiency of your Samsung appliances with the Micro Door Switch. This crucial component is compatible with a variety of Samsung products including the Range, Microwave, Microwave Oven Com...
This Samsung convection fan blade is designed for use with ranges. It plays a vital role, rotating on the motor shaft to distribute hot air throughout the oven, thus guaranteeing uniform heating. Prio...
$22.95
In Stock
Questions And Answers for NE58F9500SS
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Len
February 1, 2025
Over temperature controls set and reading 350° but the actual temperature is 540°. What would cause this to happen and which part(s) will normally need to be replaced.
For model number NE58F9500SS
Hello Len, thank you for your question. It is our recommendation to inspect the Main Board PS12085911 and all its components for signs of damages like burns or scorching. We hope this helps.
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two screws that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm. John
