N95162 Bostitch Nailer - Overview

Sections of the N95162

[Viewing 1 of 1]
Page A Diagram and Parts List for Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
Assembly,Spring Roller – Part Number: 103433
Assembly,Spring Roller
PartSelect #: PS10245658
Manufacturer #: 103433
  No Longer Available
Label-Warning – Part Number: 159911
Label-Warning
PartSelect #: PS10246472
Manufacturer #: 159911
  No Longer Available
O-Ring,2.675X.116 – Part Number: 851538
O-Ring,2.675X.116
PartSelect #: PS10247415
Manufacturer #: 851538
  No Longer Available
Spring,Compression – Part Number: 854017
Spring,Compression
PartSelect #: PS10247451
Manufacturer #: 854017
  No Longer Available
O-Ring,2.028X.122 – Part Number: MRG051531
O-Ring,2.028X.122
PartSelect #: PS10249834
Manufacturer #: MRG051531
  No Longer Available
Washer,#8 Lock – Part Number: LW8
Washer,#8 Lock
PartSelect #: PS10249778
Manufacturer #: LW8
  No Longer Available
Nut, Torque – Part Number: N70120
Nut, Torque
PartSelect #: PS10250098
Manufacturer #: N70120
  No Longer Available
Spacer – Part Number: N80357
Spacer
PartSelect #: PS10250161
Manufacturer #: N80357
  No Longer Available
Spacer Magazine – Part Number: N80340
Spacer Magazine
PartSelect #: PS10250156
Manufacturer #: N80340
  No Longer Available
SPRING-CONTACT ARM – Part Number: N80132
SPRING-CONTACT ARM
PartSelect #: PS12527698
Manufacturer #: N80132
$5.95
  Special Order
BUSHING-RUBBER – Part Number: N70143
BUSHING-RUBBER
PartSelect #: PS12529647
Manufacturer #: N70143
$5.95
  Special Order
FRAME/CAP GASKET – Part Number: 9R199852
FRAME/CAP GASKET
PartSelect #: PS12503717
Manufacturer #: 9R199852
This high-quality replacement gasket is designed for use with pneumatic nailers and serves a crucial role in maintaining a secure seal between the end cap and the tool’s main frame. Proper sealing hel...
$11.80
  In Stock
Back to Top
View More

Questions And Answers for N95162

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More