N80CB Bostitch Nailer - Overview
Sections of the N80CB
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
WASHER-PWN M6
PartSelect #: PS12517160
Manufacturer #: MPW6.3
This is an original Bostitch replacement part. The washer is designed by the manufacturer for use in staplers and nailers. This part is made of metal, and may be found in various locations in the ma...
$5.95
Special Order
SCREW-SHCS-M6X1.00X1
PartSelect #: PS12517163
Manufacturer #: MSC6100-16
This is an OEM part designed to be used with Bostitch and Porter Cable pneumatic nailers. The screw is made of durable metal and is used to hold the feed piston on to the feed piston rod. The screw ca...
$5.95
Special Order
SCREW-SHCS-M6X1.00X2
PartSelect #: PS12517164
Manufacturer #: MSC6100-25
This is an original Bostitch replacement part manufactured for use with nailers. The thumbscrew also has a hex head and is generally used to secure the rear cover. This screw is sold individually plea...
$5.95
In Stock
Order within the next 10 hrs and your part ships today!
SPRING,CMPRSN.
PartSelect #: PS12501932
Manufacturer #: 854013
This is an original Bostich replacement part. The compression spring is made of durable metal, and is compatible with many pneumatic nailers. The spring helps to secure the machining door with the doo...
$5.95
In Stock
Order within the next 10 hrs and your part ships today!
PIN SPRING
PartSelect #: PS12508338
Manufacturer #: MPG030012
This is an authentic OEM part. The spring pin (m3x12mm) is compatible with several nailers and staplers. The metal component assists with fastening the magazine toggle, and is sold individually. Plier...
$5.95
In Stock
Order within the next 10 hrs and your part ships today!
O-RING-2.343X.118
PartSelect #: PS12522431
Manufacturer #: MRG049431
It is a genuine item that is supplied by the original equipment manufacturer for use with Bostitch and Porter Cable pneumatic nailers. O-rings are generally utilized to provide a tight seal between co...
$5.95
Special Order
NUT-ESN M6X1
PartSelect #: PS12525364
Manufacturer #: MHE6100-100
This is a genuine replacement part manufactured for use with pneumatic nailers. This special metal nut is compatible with several types of nailers, and is typically used to secure the magazine bracket...
$5.95
In Stock
Order within the next 10 hrs and your part ships today!
PIN-SPECIAL SPIROL M
PartSelect #: PS12403672
Manufacturer #: 102549
The special spirol pin is made out of metal and attaches to the frame. This part is available as an individual replacement part. This is a genuine Bostitch replacement part used in compatible nailers....
$5.95
In Stock
Order within the next 10 hrs and your part ships today!
Questions And Answers for N80CB
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!