N75C-1 (Type 0) Bostitch Nailer - Overview

Sections of the N75C-1

[Viewing 1 of 1]
Page A Diagram and Parts List for Type 0 Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
Hex Soc.Hd.Bolt – Part Number: 1A105201
Hex Soc.Hd.Bolt
PartSelect #: PS10247176
Manufacturer #: 1A105201
  No Longer Available
SPRING HOLDER – Part Number: P2845203062
SPRING HOLDER
PartSelect #: PS12526192
Manufacturer #: P2845203062
$6.76
  Special Order
Safety Guide – Part Number: P2840002766
Safety Guide
PartSelect #: PS10250408
Manufacturer #: P2840002766
  No Longer Available
Shoulder Screw – Part Number: P3030002262
Shoulder Screw
PartSelect #: PS10250456
Manufacturer #: P3030002262
  No Longer Available
Exhaust Cover – Part Number: P3030002366
Exhaust Cover
PartSelect #: PS10250457
Manufacturer #: P3030002366
  No Longer Available
Set Plate – Part Number: P3030002162
Set Plate
PartSelect #: PS10250455
Manufacturer #: P3030002162
  No Longer Available
Hex.Soc.Hd.Bolt – Part Number: S2710620101
Hex.Soc.Hd.Bolt
PartSelect #: PS10250688
Manufacturer #: S2710620101
  No Longer Available
FEED PISTON COVER – Part Number: P2325205262
FEED PISTON COVER
PartSelect #: PS12509069
Manufacturer #: P2325205262
$5.95
  Special Order
MAGAZINE SPACER – Part Number: P2325205662
MAGAZINE SPACER
PartSelect #: PS12509070
Manufacturer #: P2325205662
$5.95
  Special Order
GUARD – Part Number: P2320005500
GUARD
PartSelect #: PS12509068
Manufacturer #: P2320005500
$5.95
  Special Order
O-RING – Part Number: S06P000300
O-RING
PartSelect #: PS12528030
Manufacturer #: S06P000300
$5.95
  Special Order
SPRING – Part Number: P2325202662
SPRING
PartSelect #: PS12527827
Manufacturer #: P2325202662
$5.95
  Special Order
Back to Top
View More

Questions And Answers for N75C-1

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More