N66BC-1 (Type 0) Bostitch Nailer - Overview

Sections of the N66BC-1

[Viewing 1 of 1]
Page A Diagram and Parts List for Type 0 Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
Hex Soc.Hd.Bolt – Part Number: 1A105201
Hex Soc.Hd.Bolt
PartSelect #: PS10247176
Manufacturer #: 1A105201
  No Longer Available
FEED PISTON COVER – Part Number: P2325205262
FEED PISTON COVER
PartSelect #: PS12509069
Manufacturer #: P2325205262
$5.95
  Special Order
MAGAZINE SPACER – Part Number: P2325205662
MAGAZINE SPACER
PartSelect #: PS12509070
Manufacturer #: P2325205662
$5.95
  Special Order
FEED PISTON – Part Number: P2325504962
FEED PISTON
PartSelect #: PS12509071
Manufacturer #: P2325504962
$11.45
  Special Order
Hex.Soc.Hd.Bolt – Part Number: S2710620101
Hex.Soc.Hd.Bolt
PartSelect #: PS10250688
Manufacturer #: S2710620101
  No Longer Available
SCREW-SHCS-M5X0.80X3 – Part Number: 175554
SCREW-SHCS-M5X0.80X3
PartSelect #: PS12423154
Manufacturer #: 175554
$5.95
  Special Order
NOSE – Part Number: P2840001065
NOSE
PartSelect #: PS12526191
Manufacturer #: P2840001065
$260.77
  On Order
SPRING HOLDER – Part Number: P2845203062
SPRING HOLDER
PartSelect #: PS12526192
Manufacturer #: P2845203062
$6.76
  Special Order
SPRING – Part Number: P2325202662
SPRING
PartSelect #: PS12527827
Manufacturer #: P2325202662
$5.95
  Special Order
PIN-SPRING-M3X30MM – Part Number: 174071
PIN-SPRING-M3X30MM
PartSelect #: PS12425793
Manufacturer #: 174071
$5.95
  Special Order
SPRING PIN – Part Number: P2325207562
SPRING PIN
PartSelect #: PS12529780
Manufacturer #: P2325207562
$5.95
  Special Order
DOOR PIVOT PIN – Part Number: P2325203662
DOOR PIVOT PIN
PartSelect #: PS12530908
Manufacturer #: P2325203662
$5.95
  Special Order
Back to Top
View More

Questions And Answers for N66BC-1

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More