N55C Bostitch Nailer - Overview
Sections of the N55C
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
WASHER-RUBBER-7
PartSelect #: PS12504759
Manufacturer #: 854004
This rubber replacement seal is designed for use with select pneumatic and coil-fed nailers, providing a tight and reliable seal at the nose of the tool. Its primary function is to prevent air leakage...
$5.95
In Stock
Order within the next 23 mins and your part ships today!
O-RING-.386X.094
PartSelect #: PS12522429
Manufacturer #: MRG009824
This genuine manufacturer-sourced part is specially designed for Bostitch pneumatic nailers. It is an important component which provides an air-tight seal between connected components. Unfortunately, ...
$20.69
In Stock
Order within the next 23 mins and your part ships today!
WASHER.SPECIAL
PartSelect #: PS12522766
Manufacturer #: MPW6.2
This is an original Bostitch replacement part manufactured for use with pneumatic nailers. Washers are used to disperse pressure from a nut or bolt across a wider surface area against a part assembly....
$5.95
Special Order
Questions And Answers for N55C
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
-
Richard from Bogalusa, LA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
6 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!