N401C-1 (Type 0) Bostitch Nailer - Overview

Sections of the N401C-1

[Viewing 1 of 1]
Default Diagram and Parts List for Type 0 Bostitch Nailer
Default
Keep searches simple, eg. "belt" or "pump".
WASHER-RUBBER-7 – Part Number: 854004
WASHER-RUBBER-7
PartSelect #: PS12504759
Manufacturer #: 854004
This rubber replacement seal is designed for use with select pneumatic and coil-fed nailers, providing a tight and reliable seal at the nose of the tool. Its primary function is to prevent air leakage...
$5.95
  In Stock
Order within the next 1 hr and 57 mins and your part ships today!
SCREW-SHCS-M5X0.8X12 – Part Number: MSC5080-12
SCREW-SHCS-M5X0.8X12
PartSelect #: PS12527119
Manufacturer #: MSC5080-12
  No Longer Available
COVER-FEED PISTON – Part Number: N80124
COVER-FEED PISTON
PartSelect #: PS12529656
Manufacturer #: N80124
$5.95
  Special Order
SPRING-COMPRESSION – Part Number: N80122
SPRING-COMPRESSION
PartSelect #: PS12523367
Manufacturer #: N80122
$5.95
  Special Order
ASSEMBLY, TRIGGER – Part Number: N50082A
ASSEMBLY, TRIGGER
PartSelect #: PS18994024
Manufacturer #: N50082A
  No Longer Available
LOCTITE – Part Number: 851385
LOCTITE
PartSelect #: PS12504750
Manufacturer #: 851385
$60.52
  Special Order
O-RING-2.343X.118 – Part Number: MRG049431
O-RING-2.343X.118
PartSelect #: PS12522431
Manufacturer #: MRG049431
It is a genuine item that is supplied by the original equipment manufacturer for use with Bostitch and Porter Cable pneumatic nailers. O-rings are generally utilized to provide a tight seal between co...
$5.95
  Special Order
CAP-END – Part Number: N70167
CAP-END
PartSelect #: PS12523361
Manufacturer #: N70167
It is an authentic manufacturer-sourced component which is specially designed for use with Bostitch and DeWALT nailers. This is an identical replacement for a damaged or a missing end cap that was ins...
$20.76
  Special Order
KIT-TRIGGER VALVE – Part Number: TVA6
KIT-TRIGGER VALVE
PartSelect #: PS12531525
Manufacturer #: TVA6
Restore your tool’s performance with this complete trigger valve repair kit for brad nailers and staplers. If your tool is leaking air or frequently misfiring, replacing the trigger valve may solve th...
$70.33
  In Stock
Order within the next 1 hr and 57 mins and your part ships today!
SCREW-SOC. HD. CAP M – Part Number: MSC6100-40
SCREW-SOC. HD. CAP M
PartSelect #: PS12525376
Manufacturer #: MSC6100-40
$5.95
  Special Order
GUIDE-ARM – Part Number: N70145
GUIDE-ARM
PartSelect #: PS12489146
Manufacturer #: N70145
This is an authentic manufacturer-sourced replacement part which is made for use with Bostitch nailers. It is a special part which helps to guide the arm. Refer to the appropriate diagrams for your mo...
$9.54
  Special Order
PAWL CHECK – Part Number: N70149
PAWL CHECK
PartSelect #: PS12489147
Manufacturer #: N70149
It is an authentic OEM sourced part which is specially made for Hitachi roofing coil nailers. The check pawl is an important component which triggers the push-feed function of the tool. It is an ident...
$41.42
  Special Order
Back to Top
View More

Questions And Answers for N401C-1

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More