MVWP576KW1 Maytag Washer - Overview
Sections of the MVWP576KW1
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Agitator Directional Cogs
PartSelect #: PS388034
Manufacturer #: 80040
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
$7.31
In Stock
Order within the next 3 hrs and your part ships today!
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 3 hrs and your part ships today!
Drive Hub Kit
PartSelect #: PS6012095
Manufacturer #: W10528947
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
$35.89
In Stock
Order within the next 3 hrs and your part ships today!
Washer Drive Pulley
PartSelect #: PS10057144
Manufacturer #: W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 3 hrs and your part ships today!
Washer Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$15.95
In Stock
Order within the next 3 hrs and your part ships today!
Affresh Washing Machine Cleaner - 3 pack
PartSelect #: PS1960673
Manufacturer #: W10135699
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Order within the next 3 hrs and your part ships today!
Screw, 8-16 x 1.000
PartSelect #: PS11746167
Manufacturer #: WP8533953
Sold individually.
$10.09
In Stock
Order within the next 3 hrs and your part ships today!
Washer Drain Hose
PartSelect #: PS12578897
Manufacturer #: W11244231
The drain hose carries used water from the washer to your house drain.
$31.91
In Stock
Order within the next 3 hrs and your part ships today!
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.07
In Stock
Order within the next 3 hrs and your part ships today!
Lid Latch Strike
PartSelect #: PS11750882
Manufacturer #: WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
$56.29
In Stock
Order within the next 3 hrs and your part ships today!
Drain Pump - 120V 60Hz
PartSelect #: PS11751719
Manufacturer #: WPW10276397
This washing machine drain pump is a key component responsible for removing water from the tub during the drain cycle. Designed for select top-load washers, it ensures efficient water expulsion and su...
$151.87
In Stock
Order within the next 3 hrs and your part ships today!
Agitator Cam Repair Kit
PartSelect #: PS334655
Manufacturer #: 285825
This kit includes a Driven Cam Bearing, 4 Agitator Dogs, Spring & Spring Retainer.
$94.18
Special Order
Questions And Answers for MVWP576KW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
March 18, 2024
When washer goes into final spin starts adding water again clothes arer very wet at end of cycle
For model number MVWP576KW1
Hi James, thank you for getting in touch. Based on our understanding, we would suggest checking the control board, part number PS16226987. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace it to fix the issue. We hope this sorts out your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
CNTRL-ELEC
$301.54
In Stock
Fabián
May 8, 2023
Hi. I have a Maytag top loader mvwp576kw1. When the machine is on the wash cycle it makes a terrible grinding noise. But only on the wash cycle. When it gets to rinse and spin there is no noise. Only on the wash cycle when the agitator is being used. I moved the agitator by hand after the wash cycle and it is moving well. I do not hear any grinding sounds when I move the agitator with my hands. I haven’t yet looked underneath the machine and I’m very mechanically inclined seeing as I repair work for a living. What could the issue be. Could it be the bearings? Or could it be the pulley system that is bad? I would like to keep this work in house if I can just be given some direction on what the possible causes may be for the loud grinding noise on the wash cycle. The machine works for now but that noise is very concerning. Any help would be much appreciated. Thanks
For model number MVWP576KW1
Hi Fabián, thank you for asking. Based on the description that you have provided, we would recommend checking the drive pulley kit, part number PS10057144, to fix the issue. A worn-out drum bearing or broken drive pulley usually causes a grinding or rumbling sound when the drum spins. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Washer Drive Pulley
$49.29
In Stock
Daniel
October 5, 2022
When turned to hot we only get cold water into machine. Can not get hot water into machine. Hot water is available at hose and the screen is clear. Why does the cold water come in when the selector is in the hot position?No hot available.
For model number MVWP576KW1
Hello Daniel, thank you for your question. We have researched your model and found that the issue is probably with the water inlet valve, part number PS12349203. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
VALVE
$137.96
In Stock
Cathy
July 5, 2025
I have a top loader Maytag commercial. I can’t find a replacement belt for this model anywhere. Where can I find a replacement belt?
For model number MVWP576KW1
Hello Cathy, thank you for reaching out. The belt for your model is part number PS12349341. We hope this information is useful!
Was this helpful?
Thank you for voting!
Related Parts:
BELT
$27.90
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the MVWP576KW1
[Viewing 16 of 16]Will not agitate
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Cycle Not Advancing
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washer wouldn't agitate
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Parts Used:
-
mike from Kent, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
951 of 1051 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top half of agitator did not move during wash cycle
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of old cogs remove and replace with new, reassemble
Parts Used:
-
dennis from new stanton, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
283 of 332 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator was not working
Step 1) Take off top cap with a flat head screw driver.
2) unscrew bolt (may need extension as it may be deep in the agitator.)
3) Take upper agitator off.
4) remove clog retainer and clogs.
5) insert new clogs and re-assemble.
total time 10 to 15 min.
2) unscrew bolt (may need extension as it may be deep in the agitator.)
3) Take upper agitator off.
4) remove clog retainer and clogs.
5) insert new clogs and re-assemble.
total time 10 to 15 min.
Parts Used:
-
Michael from Murray, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
71 of 89 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!