MVWP575GW0 Maytag Washer - Overview
Sections of the MVWP575GW0
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Agitator Directional Cogs
PartSelect #: PS388034
Manufacturer #: 80040
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
$7.31
In Stock
Order within the next 11 hrs and your part ships today!
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 11 hrs and your part ships today!
Drive Hub Kit
PartSelect #: PS6012095
Manufacturer #: W10528947
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
$35.89
In Stock
Order within the next 11 hrs and your part ships today!
Washer Drive Pulley
PartSelect #: PS10057144
Manufacturer #: W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 11 hrs and your part ships today!
Washer Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$16.45
In Stock
Order within the next 11 hrs and your part ships today!
Affresh Washing Machine Cleaner - 3 pack
PartSelect #: PS1960673
Manufacturer #: W10135699
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Order within the next 11 hrs and your part ships today!
Screw, 8-16 x 1.000
PartSelect #: PS11746167
Manufacturer #: WP8533953
Sold individually.
$10.09
In Stock
Order within the next 11 hrs and your part ships today!
Washer Drain Hose
PartSelect #: PS12578897
Manufacturer #: W11244231
The drain hose carries used water from the washer to your house drain.
$31.91
In Stock
Order within the next 11 hrs and your part ships today!
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.95
In Stock
Order within the next 11 hrs and your part ships today!
Lid Latch Strike
PartSelect #: PS11750882
Manufacturer #: WPW10240513
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
$56.29
In Stock
Order within the next 11 hrs and your part ships today!
Drain Pump - 120V 60Hz
PartSelect #: PS11751719
Manufacturer #: WPW10276397
This washing machine drain pump is a key component responsible for removing water from the tub during the drain cycle. Designed for select top-load washers, it ensures efficient water expulsion and su...
$151.87
In Stock
Order within the next 11 hrs and your part ships today!
Agitator Cam Repair Kit
PartSelect #: PS334655
Manufacturer #: 285825
This kit includes a Driven Cam Bearing, 4 Agitator Dogs, Spring & Spring Retainer.
$94.18
On Order
Questions And Answers for MVWP575GW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Arthur
April 8, 2024
does not spin and drain, sounds like the pump is running, scooped the water out some left in the tub took drain hose off and rest of water ran out
For model number MVWP575GW0
Hi Arthur, thank you for contacting us. We have found that the issue is with the draining system. We would recommend clean the drain hose if it is clogged. If that is the case, then you may need to replace the drain pump, part number PS11751719, to fix the issue. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Drain Pump - 120V 60Hz
$151.87
In Stock
Chad
February 15, 2025
Is the bolt between the wash plate and drive hub reverse thread? I can't get it to budge going the normal counterclockwise.
For model number MVWP575GW0
Hi Chad,
Thank you for your question. This bolt has right-hand threads. To remove the bolt, you may need to use a long extension to get some leverage. You may also need to hold the wash plate so you can break the bolt free as it can be on quite tight. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Washplate Bolt
$9.52
In Stock
Mike
October 5, 2023
My washer ndose not spin in wash mode but will spin in drain and spin mode. what part do I need to fix this
For model number MVWP575GW0
Hello Mike, thank you for the great question. According to our research, the washer does not agitate if the washing laundry load is heavy. We would suggest to balance the laundry load by washing fewer clothes per batch. If that does solve the issue, you may need to check the drive hub kit, part number PS6012095, to help fix this issue. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
Drive Hub Kit
$35.89
In Stock
DARRELL
November 10, 2023
the washer stopped mid cycle
For model number MVWP575GW0
Hello Darrell, thank you for asking. We would recommend checking the control board, part number PS12745370, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Electric Control Board
$297.80
In Stock
Eugene
March 20, 2024
Clothes still soaked at the end of wash.
For model number MVWP575GW0
Hi Eugene, thank you for reaching out. The drain pump is responsible for removing water from the washer during the drain cycle. If it is malfunctioning or clogged, it may not be draining the water properly. Check the pump for any obstructions or signs of damage. If necessary, replace the drain pump, part number PS11751719. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Drain Pump - 120V 60Hz
$151.87
In Stock
- < Prev
- 1
- 2
- Next >
Common Symptoms of the MVWP575GW0
[Viewing 16 of 16]Will not agitate
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Marks left on clothes
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Cycle Not Advancing
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
washer wouldn't agitate
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out).
Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
Parts Used:
-
mike from Kent, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
952 of 1053 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top half of agitator did not move during wash cycle
pull off softner dispenser, pop off agitator cap by inserting straight screw driver into small slot, remove bolt inside agitator with socket wrench and long extension, pull agitator straight up off shaft, place agitator on floor, with feet holding bottom half pull top half apart from bottom half by pulling straight up, note direction of old cogs remove and replace with new, reassemble
Parts Used:
-
dennis from new stanton, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
284 of 333 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator was not working
Step 1) Take off top cap with a flat head screw driver.
2) unscrew bolt (may need extension as it may be deep in the agitator.)
3) Take upper agitator off.
4) remove clog retainer and clogs.
5) insert new clogs and re-assemble.
total time 10 to 15 min.
2) unscrew bolt (may need extension as it may be deep in the agitator.)
3) Take upper agitator off.
4) remove clog retainer and clogs.
5) insert new clogs and re-assemble.
total time 10 to 15 min.
Parts Used:
-
Michael from Murray, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
71 of 89 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!