This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
The transmission drives the agitator and spins the basket in the washer. Possible Repair Solution For: Not washing properly, will not agitate, pumps but will not spin.
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tammy
January 11, 2024
How do you replace the drive belt
For model number MVWC565FW3
Hi Tammy, thank you for your inquiry. Our research has found, part number PS16744917 is the correct replacement belt for your model. We have included a video to assist you. We hope this helps.
I need Springs but can't find them in parts search
For model number MVWC565FW3
Hi Julie, thank you for contacting us. If you are looking for the suspension springs, they come as a part of the suspension rod kit, part number PS12347546. We hope that helps!
Hi
I am having an issue with my washing machine where it wont fill past 7 inches of water in the drum
I have run the auto diagnostics and got the sensor light slow blinking
from what I can find this means a faulty control board.
my 3 questions are
1.can you conferm if replacing the control board whuold fix this issue?
2.If not what is the return policy for a part
3. can you point me to the correct control board to use
For model number MVWC565FW3
Hello Alex, Thank you for reaching out. We suggest checking the water pressure hose first. Make sure there is no build up preventing the water from passing through properly. The blinking sensor light indicates there is an issue with the water lever pressure switch. On this model the switch is built into the control board PartSelect Number PS16744920. We have attached a link for the return policy. Let us know if you have further questions!
Hello Dan, thank you for reaching out to us. Yes, this washer has a filter for the drain pump. The filter part number is PS16660526. We hope this information helps!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier and only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
