This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
January 24, 2020
Washer makes a squealing noise during spinning cycle and sometimes we smell rubber burning. Any suggestions?
For model number MVWC555DW1
Hi Ashley. This is likely a faulty belt that needs to be replaced. Thank you for your question and good luck with your repair.
Washing machine makes a loud noise when it’s washing.
For model number MVWC555DW1
Hello Gerardo, Thank you for writing The grinding noise is most caused be a faulty Washer Drive Pulley PartSelect Number PS10057144 and there is a video on the installation for this part as well. https://youtu.be/T2ZfHgVRUXw. We hope this helps.
Hello Richard, Thank you for writing. There are several parts that may be the issue. The Water Pump PartSelect Number PS11738156, Drive Belt PartSelect Number PS11747978, Washer Drive Pulley PartSelect Number PS10057144, Drive Hub Kit PartSelect Number PS6012095. Every one of the parts listed have an installation video on our site. Good luck with your repair.
Washer operates normally and performs normally except at the end of the spin cycle the wash plate will spin very fast for a half a second three times. It appears that a high speed spin should engage when this happens but doesn’t and clothes are still very wet at the end of the wash cycle. I already replaced the splutch assembly which appeared fine and didn’t fix the problem
For model number MVWC555DW1
Hello Robert, thank you for reaching out. We would suggest checking the shift actuator, part number PS16221077. It moves the plastic arm to engage the transmission for spinning. When it fails or the plastic arm slips, the motor tries to spin the drum, but only the wash plate at the bottom engages. Those half-second bursts are the machine attempting to sense the load or ramp up, but because the drum isn't locked to the motor, only the plate moves. Replacing it might fix the issue. We hope this helps!
Hi, why would the machine stop during the cycle and make a humming noise. If I pull the plug and let it sit overnight it starts and continues the cycle. I did 2 or 3 loads and it did the same thing. It is working again.
For model number MVWC555DW1
Hi Nick. It sounds like either a failing drain hose, water supply or drive motor. Thank you for your question and good luck with your repair!
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
