This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 5 hrs and your part ships today!
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
$35.89
In Stock
Order within the next 5 hrs and your part ships today!
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$85.01
In Stock
Order within the next 5 hrs and your part ships today!
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Order within the next 5 hrs and your part ships today!
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
$35.94
In Stock
Order within the next 5 hrs and your part ships today!
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
$137.05
In Stock
Order within the next 5 hrs and your part ships today!
If your washer isn’t filling properly, keeps running water, or has a leak at the back, the water inlet valve might be the problem. This part controls how much hot and cold water enters the machine and...
$96.25
In Stock
Order within the next 5 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
$106.65
In Stock
Order within the next 5 hrs and your part ships today!
Order within the next 5 hrs and your part ships today!
Questions And Answers for MVWC555DW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
18 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sallie
February 25, 2020
Machine suddenly stopped spinning, sound like it tries then stops. I have audio if you want to hear it, who should i call or what should i do? Thanks
For model number MVWC555DW0
Hello Sallie, thank you for your question. If the unit tries to spin but will not actually get into the fast spin, the most likely issue is PartSelect Number: PS11769864 shift actuator. This moves the unit from agitate to spin. We have an installation video on our site on how to replace that. Good luck with your repair.
What to do to stop clothes from being left sopping wet after wash cycle? Even after spin and drain cycle.
For model number MVWC555DW0
Hello, Thank you for your question. If your washer will not spin out all water and clothes are still wet, the drain pump might be clogged with debris or possibly faulty. There could be a foreign object that is stuck in the pump and inside the drain hose.Check that, and then you will also want to check your lid switch. We hope this helps, good luck with this repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Joel
August 6, 2021
Washing machine will not fill with water
For model number MVWC555DW0
Hello Joel, Thank you for the question. Normally this is an indication the Water Inlet Valve is defective and may need to be replaced. We hope this helps!
Hello Joel, Thank you for contacting us. Normally if the Washer is not filling with water and it is powering on normally, the Water Inlet Valve is defective and may need to be replaced. We hope this helps!
Hello Lee, We have a general installation video that will show you how these types of parts are installed in an washing machine. You can view that here: https://www.youtube.com/watch?v=2slahiXRGow. Good luck with your repair.
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
