MVWC465HW2 Maytag Washer - Overview
Sections of the MVWC465HW2
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Drive Hub Kit
PartSelect #: PS6012095
Manufacturer #: W10528947
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
$35.89
In Stock
Washer Drive Pulley
PartSelect #: PS10057144
Manufacturer #: W10721967
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
$49.29
In Stock
Washing Machine Upper Agitator
PartSelect #: PS11727882
Manufacturer #: W10836692
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
$123.17
In Stock
Washing Machine Door Lock Assembly
PartSelect #: PS12704713
Manufacturer #: W11307244
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
$161.61
In Stock
Shift Actuator - 6 Pin
PartSelect #: PS11769864
Manufacturer #: W10913953
This 6-pin shift actuator is a genuine replacement part designed for use in select washing machines. It plays a critical role in controlling the movement of the transmission, allowing the appliance to...
$68.42
In Stock
Water Inlet Valve
PartSelect #: PS12349267
Manufacturer #: W11210459
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
$98.88
In Stock
Affresh Washing Machine Cleaner - 3 pack
PartSelect #: PS1960673
Manufacturer #: W10135699
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
$25.31
In Stock
Screw, 8-16 x 1.000
PartSelect #: PS11746167
Manufacturer #: WP8533953
Sold individually.
$10.09
In Stock
Washer Drain Hose
PartSelect #: PS12578897
Manufacturer #: W11244231
The drain hose carries used water from the washer to your house drain.
$31.91
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
This hose clamp is sold individually.
$14.95
In Stock
Questions And Answers for MVWC465HW2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
February 5, 2023
On the maytag Washer 4 years old. Set to wash . starts and goes thru cycles. Water pumps out at end of wash. Seems like spin cycle does not activate. Also makes a clanging noise. Clothes are still sopping wet when cycles end. Thanks for your help
For model number MVWC465HW2
Hello Robert, thank you for contacting us. Please check the drive hub kit, part number PS6012095, the drive pulley, part number PS10057144, and the shift actuator, part number PS11769864. These are the most likely culprits of the issue. If this does not help, the issue is probably related to the control board, part number PS16744869. It manages the washer's functions such as filling, washing, draining, and spinning. We hope this sorts out your problem!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Drive Hub Kit
$35.89
In Stock
Washer Drive Pulley
$49.29
In Stock
Shift Actuator - 6 Pin
$68.42
In Stock
CNTRL-ELEC
$343.64
In Stock
Nirah
July 21, 2021
This has been the worst washer I have ever had. It doesn't complete its cycle. You expect the wash to be completed and its back on wash and shut off. Had the repairman here when it was new and it still acts the same.
For model number MVWC465HW2
Hello Nirah, Thank you for the question. Sorry to hear you are having so many issues with the appliance. Without knowing what was repaired on the appliance by the repairman, we suggest replacing the Control Board that controls the Timing of the cycles, PartSelect Number PS16221221. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
CNTRL-ELEC
$343.64
In Stock
Bob
June 2, 2023
During agitation only, machine makes a loud sqeeky noise. On then off sqeek.
The noise is the only problem, all other functions work.
For model number MVWC465HW2
Hi Bob, thank you for reaching out. We would suggest making sure the load is not unbalanced and the clothes are not unevenly distributed in the washer drum. If the issue remains, the problem might be with the drive belt, part number PS12578772. It is suggested to check if the belt is not too tight or is slipped out of place. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
BELT
$65.15
In Stock
C R
December 6, 2022
MAchine was making loud noise and would not agitate. I replaced Washer Drive Pully, and Drive Hub Kit. Now it is much more quiet, however the agitator is barley moving, not even enough for delicate cycle. It was on Power Wash. What part should I try next?
For model number MVWC465HW2
Hello, thank you for reaching out. According to our research, we would suggest checking the Drive Motor, part number PS11726282. If that does not help, we would recommend checking the Upper Agitator, part number PS11727882 and Drive Belt, part number PS12578772. If you require assistance placing an order, please contact customer service. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Motor Assembly
$357.11
In Stock
Washing Machine Upper Agitator
$123.17
In Stock
Wayne
November 23, 2022
Had 3 repair visits for problem. At beginning of wash cycle after water fill a chattering noise sporadically appears and after about 30-45 seconds a pop then continues to finish wash. One repair said it was probably the clutch and it would be too expensive. Last person said he wold have to heard the noise before he could confirm the cause. So I guess when it totally breaks it can be replaced. Ideas ??
For model number MVWC465HW2
Hello Wayne, thank you for reaching out. According to our research, we would recommend checking the following parts to fix your issue: Washer Drive Pulley, part number PS10057144, Drive Hub Kit, part number PS6012095, and Washer Gear Case, part number PS16220910. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Common Symptoms of the MVWC465HW2
[Viewing 17 of 17]Will not agitate
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Noisy and Marks Left on Clothes
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Cycle Not Advancing
Fixed by
these parts
these parts
Show All
No hot or cold water
Fixed by
these parts
these parts
Show All
Water Filling Issues
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Draining Issues
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Timer Not Working
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Hub had warn its grooved teeth off and washer wouldnt agitate
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
Parts Used:
-
Allison from RICHFORD, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
65 of 90 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Parts Used:
-
David from BLOOMINGTON, IN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
66 of 99 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't spin properly
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
Parts Used:
-
Beverly from MADISON, IN
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
36 of 39 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!