This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 11 hrs and your part ships today!
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$43.28
In Stock
Order within the next 11 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
In Stock
Order within the next 11 hrs and your part ships today!
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
$89.97
In Stock
Order within the next 11 hrs and your part ships today!
Order within the next 11 hrs and your part ships today!
Questions And Answers for MVWC415EW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
35 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mahmoud
December 30, 2019
Stopped on wash mode
For model number MVWC415EW1
Hello Mahmoud, thank you for your question. There are a few parts we would recommend checking to determine the issue. They are the Washer Drive Pulley Part Number: W10721967, Drive Belt
Part Number: WPW10006384, ACTUATOR Part Number: W10913953, and door lock Part Number: W11307244. I hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
December 26, 2019
The lid lock light is on, can't get it to go off or the washer to start.
For model number MVWC415EW1
Hi Donna, thank you for your question. It sounds like you are having an issue with your lid lock. It is suggested that you unplug your appliance for about 10 minutes. If you are still encountering the issue, then you may have to replace your lock. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
February 23, 2020
At the end of the spin cycle all water is out of the tub but clothes are still soaked
For model number MVWC415EW1
Hello, Thank you for your question. You will need to check into the drain hose and the drain pump. ensure they are not clogged up and ensure they are working properly. We hope this helps, good luck with this repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Izaeh
November 11, 2019
At the end how come
MVWC415EW1 its not spin dry its soaking wet
For model number MVWC415EW1
Hi Izaeh, Thank you for the question. I suggest testing the Lid Latch Assembly, PartSelect Number: PS12704713. If the switch is defective it will not allow the appliance to go into a spin and drain. To test the switch, first and foremost disconnect your water and the power from your appliance before starting. Locate where your switch actually fits on to your appliance and place a magnet between them. Now there will be a magnetic connection between the lid switch and solenoid. After you do that, put the lid of the washer back on and turn on the appliance. If the appliance turns off, disconnect power once more and reposition the magnet. Caution. If you are at all uncomfortable with doing something like this, I would strongly suggest contacting a repair technician to come and help you. I hope this helps.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.