This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 12 hrs and your part ships today!
This kit includes one driver hub and two driven basket hubs. The basket hub is located under the agitator. If your washer is not agitating or spinning properly, the hubs will need to be replaced.
$47.81
In Stock
Order within the next 12 hrs and your part ships today!
This lid lock helps keep your washer running safely and smoothly. It locks the lid during cycles so the machine won’t spin or wash with the lid open. If your washer won’t start or the lid won’t close ...
$121.67
In Stock
Order within the next 12 hrs and your part ships today!
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$11.80
In Stock
Order within the next 12 hrs and your part ships today!
This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To c...
$55.71
In Stock
Order within the next 12 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
$25.31
In Stock
Order within the next 12 hrs and your part ships today!
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which wi...
$105.04
In Stock
Order within the next 12 hrs and your part ships today!
This drain pump assembly removes water from the washer during the drain cycle. If your washer isn’t draining properly, replacing the pump may be necessary. Ensure compatibility with your model before ...
$151.24
In Stock
Order within the next 12 hrs and your part ships today!
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$141.25
In Stock
Order within the next 12 hrs and your part ships today!
Questions And Answers for MVWB980BW0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sow
December 3, 2019
What is f51 code
For model number MVWB980BW0
Hello Sow and thanks for writing.
The F51 error may indicate there is a MOTOR ROTOR POSITION SENSOR FAILURE (RPS). The sensor and control board has a connection or fault issue. This error can be cleared by cleaning/reconnecting the sensor PS11749664 OR replacing it. We hope this helps. Please contact us anytime.
The machine goes through the cycle, rinses, spins and the clothes are still very wet. And I get a brief OL code.
So I ordered a drum balance sensor, so the motor doesn’t slow down when it spins out. And new balancing Rods to stabilize the load.
Is this right?
For model number MVWB980BW0
Hello Mark, thank you for your inquiry. The OL error code indicates that the washer is overloaded. We would recommend making sure that the load is distributed evenly. If the problem persists, then replacing the parts that you have ordered will most probably solve the problem. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Joseph
January 2, 2025
can I replace the agitator shaft? It is corroded and hub repair kits are only lasting a week or 2
For model number MVWB980BW0
Hi Joseph, thank you for contacting us. The agitator shaft you are looking for is not sold separately, it comes as a part of the outer tub. The part number is PS3501998. We hope this is what you were looking for!
Removed a cap in the center of the tub basket which has a bolt that needs removed I believe it's a 9/16 after I removed the bolt I then removed the center of the bottom of the basket assembly which then allowed me to get to the basket hub that needed replaced it was a little dirty and I couldn't get it out so I sprayed a little penitrating oil on it let it sit a little then I was able to remove the hub and install the new one then I put it all back together and the washer is working great
3rd time replacing this part. The plastic grooves against the metal get wore down. Only 20$ to repair ! Take off the 3/8 bolt - center pops out. Remove screws pop out old piece and tighten new piece each side evenly.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
