This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This washing machine inlet valve is a genuine OEM replacement part designed to regulate water flow during the fill cycle. Controlled by an internal solenoid, the valve opens and closes as needed to al...
Having a problem with a funky-smelling washing machine, or one that just doesn't seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This p...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
This agitator assembly is a key component in many washing machines, designed to rotate back and forth during the wash cycle to help loosen dirt and stains from clothing. It features a central shaft wi...
This lid lock assembly is designed for use in various top-load washing machines and serves as a critical safety feature. Located beneath the washer lid, it includes the locking mechanism and wiring ha...
If your washer isn’t spinning, agitating, or cleaning clothes like it used to, the gearcase might be the issue. This part powers the agitator and spin basket, helping your machine run smoothly. It fit...
This drain pump is engineered for top-load washing machines and plays a vital role in the appliance’s drainage system. During the drain cycle, it efficiently removes water from the washer tub and chan...
This clamp helps to prevent leaking by holding the end of water hose in place.
$13.73
In Stock
Questions And Answers for MVWB765FW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lori
March 11, 2025
E5 F1 error code. Need a new latch lock? Which one do I order. Machine won’t lock or start. Cleaned around it. Then unplugged. Will not begin cycle
For model number MVWB765FW2
Hi Lori,
Thank you for your question. The F5 E1 error code does indicate that there is an issue with the door switch. First make sure that there is nothing obstructing the door from completely shutting. Then unplug the washer from the electrical outlet for a few minutes to reset it. If the error code reappears, you will need to replace the lid lock assembly, part number PS11722981. We hope this helps!
I washed cloth shower liner and a small section is stuck in the gap at the bottom of machine around the center piece.
For model number MVWB765FW2
Hi Ethel,
Thank you for your question. If a piece of the cloth shower liner is stuck under the agitator, then you will need to remove it. We have included a link to one of our YouTube videos that you may reference on how to remove and install the agitator assembly. The washer and agitator assembly in the video may appear different from yours, but it will give you a general idea on how to remove and install the part. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kristin
January 25, 2025
Somehow the gray removable “lid” for middle section of dispenser drawer has gone missing. I don’t need the entire dispenser drawer, only the middle section gray “plate” which provides a sort of cover.
Can I pleeeeeeze order just this plastic piece?
For model number MVWB765FW2
Hi Kristin, Thank you for reaching out to PartSelect.com. Very sorry, Whirlpool does not sell just the Cover. They only sell the dispenser as one assembly. Thank you for the inquiry, good luck with the repair!
When the washer starts the cycle the sense light comes on, the agitator moves back and forth a few times, then the wash light comes on. After the wash light is on for a short period it goes back to the sense light on and does the sensing again and repeats with the wash light on.
It will not start the wash.
For model number MVWB765FW2
Hi Jerry,
Thank you for your question. To resolve this issue, reset the washer by unplugging it for 10 minutes. If the lights come back on after you have plugged it back in, press and hold the cancel button until the lights turn off. Once the lights are out, start a wash cycle. We hope this helps!
Was this helpful?
Thank you for voting!
Jess
July 19, 2023
Our washer has developed a high-pitched squeal during it's second cycle. What is the common cause? Is it a bearing, motor, ???
For model number MVWB765FW2
Hi Jess, thank you for contacting us. We have researched the model and would suggest checking the slider assembly, part number PS10060062. We hope this helps!
1.) disconnect power to your washer. Turn off water supply and disconnect from the washer.
open the washer top and remove plastic cap from the wash plate
2.) using 7/16 socket, remove bolt from the wash plate. If you can't remove it with a socket , I recommend using impact wrench.
3.) remove wash plate ( you might need to spray penetrating oil or wd40 inside the bolt hole to loosen it. Check to make sure the wash plate gear grooves are not worn down, if they are, replace it.
4.) using your Maytag specific spaner nut wrench, remove the spaner nut from the shaft of the gear case. This should be right underneath where the wash plate was. If you can't turn it by hand , use a rubber mallet or hammer to encourage it.
5.) some people remove the wash basket at this point. I don't think it is necessary.
6.) close your washing machine. Tape the top closed to keep it from flying open. Tilt your washer back and prop it up where you have access to the underside of the washing machine.
7) remove motor rotor bolt and pull rotor off of the motor.
8.) disconnect the two wire connectors that supply power to motor. using a socket, remove bolts that are keeping motor attached to the gear case.
9.) Now that the gear case is all the is remaining on the underside, you can remove the 4 bolts that are holding the gear case to the washer. Now try to pull gear case out.
10.) if gearcase will not pull out, lower washer back to upright position. Spray penetrating oil or wd40 around the shaft of the gearcase and allow it to sit for 5-10 minutes. Using a hammer, lightly tap on the shaft of the gearcase and it should now fall out. ( you might have to apply penetrating oil again, or apply more force with the hammer.
11.) reinstall motor to new gearcase. Insert new gear case to the washer. Reinstall bolts and reconnect power supply wires.
12. ReInstall spaner nut inside the washer, reinstall wash plate.
Raised lid to remove two Torx head screws from each hinge. Lid will then lift off of hinges. Installation of new lid was the reverse of the removal procedure. It is best to install one hinge to the lid by removing that hinge from the washer. The lid can then be installed by inserting that hinge into it's spot and then over the other hinge. Install the hinge screws into the second hinge and the job is complete. The lid now closes properly allowing the automatic lid lock to function properly.
Removed the old lid by removing the two screws on both sides of the lid holding it to the hinge. Then pull upon the lid to remove. Slide the new lid back on the hinges being careful to slide in the right slot in the lid. Replace the screws through the lid into the hinges and your done
