MMV1174FB2 Maytag Microwave - Overview
Sections of the MMV1174FB2
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Light Bulb - 40W
PartSelect #: PS2376034
Manufacturer #: 8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
$11.26
In Stock
Grease Filter
PartSelect #: PS3650910
Manufacturer #: W10208631A
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
$44.92
In Stock
R Ceramic Fuse 20 A
PartSelect #: PS17629444
Manufacturer #: W11707984
This part protects the microwave by shutting it off if there is an electrical surge.
$41.81
In Stock
DIODE
PartSelect #: PS12584264
Manufacturer #: W11256462
This part allows power to go one way but not the other.
$37.43
In Stock
Cook Tray
PartSelect #: PS12728436
Manufacturer #: W11367904
This glass turntable tray helps food cook evenly by rotating inside the microwave. Verify size and fitment before ordering.
$114.55
In Stock
Microwave Damper
PartSelect #: PS11728088
Manufacturer #: W10843943
This assembly includes the damper door and frame.
$83.17
In Stock
Microwave Turn Ring
PartSelect #: PS12584163
Manufacturer #: W11252182
This support ring sits underneath the glass turntable tray.
$49.79
In Stock
Microwave Top Mounting Screw
PartSelect #: PS11744892
Manufacturer #: WP8169704
This screw is sold individually.
$11.21
In Stock
Light Socket
PartSelect #: PS2342199
Manufacturer #: W10210871
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$14.12
In Stock
Charcoal Filter
PartSelect #: PS11769323
Manufacturer #: W10892387
We know your appliance woes, and were here with a solution: The Whirlpool Charcoal Filter built especially to make your microwave function like brand new again. This filter eliminates cooking smells t...
$29.19
In Stock
Interlock Support
PartSelect #: PS11749178
Manufacturer #: WPW10156813
Also known as a switch holder.
$13.89
In Stock
Questions And Answers for MMV1174FB2
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the MMV1174FB2
[Viewing 7 of 7]Won’t turn on
Fixed by
these parts
these parts
Show All
No heat
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Exhaust fan not working
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light bult needed to be replaced
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Parts Used:
-
Deborah from Millersville, MD
-
Difficulty Level:Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
220 of 325 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bulb "burnt out"
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Parts Used:
-
Joseph from Pembroke, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
96 of 160 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not heating, working otherwise
This was an over-the-range microwave/hood, so the replacement parts were significantly cheaper than buying a new unit.
Take microwave down (really a two-person job). Remove microwave cover (about 20 philips screws), discharge HV capacitor by shorting terminals to microwave case. Take photos before pulling anything apart. Remove plastic ducting covering part of the magnetron (3 philips screws). Remove old magnetron (4 Torx screws), need to disconnect small thermostat on side (2 philips screws) and replace with new magnetron. Replace HV diode (screw on one end, other end simply plugged into capacitor terminal). Put everything back together and it works fine.
Take microwave down (really a two-person job). Remove microwave cover (about 20 philips screws), discharge HV capacitor by shorting terminals to microwave case. Take photos before pulling anything apart. Remove plastic ducting covering part of the magnetron (3 philips screws). Remove old magnetron (4 Torx screws), need to disconnect small thermostat on side (2 philips screws) and replace with new magnetron. Replace HV diode (screw on one end, other end simply plugged into capacitor terminal). Put everything back together and it works fine.
Parts Used:
-
Keith from Chandler, AZ
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
52 of 61 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!