This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. This part is sold separ...
$23.96
In Stock
Order within the next 11 hrs and your part ships today!
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
$51.13
In Stock
Order within the next 11 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.01
In Stock
Order within the next 11 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 11 hrs and your part ships today!
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$63.92
In Stock
Order within the next 11 hrs and your part ships today!
If your dryer drum isn’t spinning, the motor might be the issue. This replacement motor works with many Whirlpool-brand dryers made before 1996 and comes with the pulley already attached. It powers th...
$143.77
In Stock
Order within the next 11 hrs and your part ships today!
This dryer door handle is designed to facilitate smooth opening and closing of the dryer door. Measuring 5-3/4 inches by 2 inches, it features a white, smooth-surfaced finish that complements most dry...
$62.56
In Stock
Order within the next 11 hrs and your part ships today!
This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit. The thermostat and fuse help prevent the dryer from overheating.
$45.34
In Stock
Order within the next 11 hrs and your part ships today!
This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.
$55.60
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for MGDC215EW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Colleen
June 7, 2023
I am looking for the switch on the door that lets the dryer turn on and off. Do you have this available
For model number MGDC215EW2
Hello Colleen, thank you for contacting us. The switch you are looking for is a door switch, part number PS11756443. We hope this helps!
Dryer turns on and heats but after 15 minutes it shuts down, you have to open door and let it cool down or if you wait a while it will restart on its own if you don’t open the door up, 2 months ago I disassembled the vent tube and cleaned thought that was it. Still does it. Thanks in advance for any advice!
For model number MGDC215EW2
Hi Don, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the cycling thermostat, part number PS11741405, to solve the problem. Glad to be of assistance!
I need to replace the timer as the stem broke from the knob when I tried to start the drying cycle
For model number MGDC215EW2
Hello Mary, thank you for the question. The timer, part number PS11749830, is compatible with your model. If you require assistance to place an order, please contact customer service!
HOW DO I. MAKE THE DRYER STOP WHEN THE CYCLE IS DONE? AFTER A FEW MINUTES, IT STARTS UP AGAIN AUTOMATICALLY. I ASSUME THIS IS TO ASSIST IN WRINKLE CONTROL, BUT ONCE THE CLOTHES ARE DRY, I DON'T WANT THE DRYER TO START UP AGAIN. I WANT IT TO STOP WHEN THE SET CYCLE IS DONE.
For model number MGDC215EW2
Hi Tracey, thank you for reaching out. Based on our understanding of the issue, we would suggest replacing the timer, part number PS11749830, to solve the problem. It controls the electrical components and the duration of the dryer cycles. We hope this helps!
Timer does not advance or shut off
Clothes dry.
Had washer and dryer near 5 years.
13.8 ft of running vent
For model number MGDC215EW2
Hello Sheryl, thank you for reaching out. We looked into your model and found that the issue is probably with the timer, part number PS11749830. We recommend checking the timer; if it is faulty, replace it. We hope that helps!
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open and when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
It was simple once I figured out what to do:). I removed the 2 screws on the top of the dryer... they were a bit hard to find. Even with the other descriptions on this site. I was removing things I didn't need to. The 2 screws you need to remove are under the LINT COLLECTOR LID. Remove those 2 screws & lift the lid... it will be tight at first. the front of the lid has 2 "catches" in the corners.
The hardest part was getting the door switch assembly to "unplug". We pried it off -- eventually -- & then simply plugged in the new one.
Saved me LOTS of money & was worth the 30 minutes - 1 hour of work.
As I said previously, once you realize how to get the lid up & manage to pry off the plug, that's all there is to it -- easy!
