This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This clear plastic door bin attaches to the inside of the refrigerator door and holds jars and bottles. Door bins can crack and break due to frequent and heavy use, and faulty bins should be replaced.
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets f...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and s...
Our Whirlpool Door Stop Bracket is a genuine product that you need to keep your refrigerator and its surrounding cabinets protected from any potential damage. It's much more than just a part'it's a pe...
$35.48
In Stock
Questions And Answers for MFB2055FRZ00
Ask our experts a question about this model and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
February 16, 2025
Bottom self frame above crisper broke. Glass is still intact. Is there replacement for W10322663? If so cost.
For model number MFB2055FRZ00
Hello Dave, thank you for your question. We believe the shelf you are seeking is PS11755364. For the most up to date availability and pricing, we ask to view on the website. We hope this helps
I am in need of one of the door bins with the number W10308869 written on the bottom of it. Can you help me with this replacement part?
For model number MFB2055FRZ00
Hello Lynn, thank you for the query. According to our research, your model comes with two different door bins: a cantilever bin, part number PS12349583, and a door bin, part number PS11753920. We hope this helps!
The compressor line running to the freezer is totally iced up. I was told circulating fan is shot but I can hear it running, non stop.
For model number MFB2055FRZ00
Hi Travis, thank you for asking. You may need to check if the compressor is recently been over charged. An overcharge will make your compressor run longer and harder than needed. If this is not the case, you may need to check the start relay, part number PS11754876, to fix the issue. The relay act as a switch that turns the compressor on and off, allowing it to cool the refrigerant that circulates through the ice machine's evaporator coils. If this is faulty, the compressor will not turn off, causing the refrigerant to freeze up. We hope this sorts out your problem!
Bracket, part #PS11754209 was covered by plastic which is not shoving on diagram and is broken. Can you help to find it?
For model number MFB2055FRZ00
Hello Ted, thank you for getting in touch. If you are looking for the door cam, then its part number is PS11755285. If you require assistance to place an order, please contact customer service!
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
