Sold individually. This is a radiant surface element with a limiter, and it works in conjunction with your range. The function of this part is to give heat to the surface directly above it, on cooking area stovetop.
This part is a replacement halogen lamp for your oven. The bulb is 25 watts and 120 volts. If your light bulb is burned out, this is the part that replaces it. Be sure to turn off power to your range ...
This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the pro...
This is a replacement screw and washer for your oven/range. It is a Phillips-head screw approximately half an inch long, and the washer is approximately 1 inch in diameter. The screw attaches the oven...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
December 23, 2019
I have a Maytag gemini double oven shows a f1 2 code. Replaced the lower oven sensor (probably didn't have to ) and turned oven on for 30 minutes seem to work fine. Turned on the timer for the lower oven and got the f1 2 code again about ten minutes later. Do i have to replace the mother board or can you just replace the internal clock to see if that fixes the problem. Just guessing...
looking for answers,
john
For model number MER6772BAS
Hello John and thank you for writing.
The error means that the display relay control board thinks your temperature on your lower oven on your double oven range is running away and getting too hot. As you already changed the sensor it might be a faulty bake element PS11744518 check continuity and replace if faulty. We hope this helps. Please contact us anytime.
have a Maytag gemini double oven shows a f1-1 code
For model number MER6772BAS
Hello Fayez, thank you for your inquiry. The error code f1-1 is the temperature sensor problem. The temperature is rising and getting too hot in the upper oven. We would recommend checking the wiring for any damage. If this is not the issue, you may need to replace the upper oven temperature sensor, part number PS11744537, to fix the issue. It detects the temperature within the oven cavity. Glad to be of help!
Removed the oven door by opening slightly, then pic door up to remove. Remove 2 screws holding oven sensor in place, gently pull on sensor to remove, had to remove about 8 inches to get at plastic connector. Unplug connector, had to use an adapter cable supplied with the PartSelect kit to install new sensor, push cable back into opening, reinstall 2 screws. The oven works fine! Note that due to thermal lag the temperature overshoots to 370 degrees and undershoots to 340 degrees, this appears to be normal oven operation. Putting door back in place was easy.
Turned the breaker off, I removed 2 screws securing the range top to the range, opened the top and secured it in the up position, Removed the 2 screws securing the element ,one at a time I swapped the quick connectors from the old element to the new and repeated the process in reverse. I save over $100.00 in labor, plus most companies get you for a trip charge. It was easy!!
Thermal switch is integral to element and can not be changed, must replace entire element.
Turn off power. Removed front two screws above oven door jamb and lifted the top. Removed the bracket that holds the element against the glass top and removed the element. Moved brackets from old element to new one, aligning to same numerical position and then moved wiring to new element. Slide new element under bracket and reinstalled single screw. Replaced top and screwed down. Turn on power and test .