This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$60.74
In Stock
Order within the next 11 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$32.93
In Stock
Order within the next 11 hrs and your part ships today!
This dryer lint filter is designed to capture lint and debris during the drying cycle, helping maintain airflow and prevent potential fire hazards. Measuring approximately 12.5 inches wide by 10.5 inc...
$67.65
In Stock
Order within the next 11 hrs and your part ships today!
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$45.26
In Stock
Order within the next 11 hrs and your part ships today!
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$13.59
In Stock
Order within the next 11 hrs and your part ships today!
The dryer heating element generates the heat required for drying clothes. Constructed with a nickel-chrome coil, it resists electricity to produce heat. If the dryer no longer heats, inspect the therm...
$133.50
In Stock
Order within the next 11 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.01
In Stock
Order within the next 11 hrs and your part ships today!
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
$67.53
In Stock
Order within the next 11 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 11 hrs and your part ships today!
The idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.
$49.95
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for MEDB725BW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
September 18, 2022
The start button plus all lights are on but when I hit the start button there is nothing
For model number MEDB725BW0
Hi Paul,
Thank you for your question. If your dryer will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door switch, the door catch, the thermal fuse and the motor. We have included a link that you may reference on how to check these parts and some others as well. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
The dryer does not fully dry on preselected cycles or extended time selections, and some lint collects on the inside of the drum with little on the filter. Troubleshooting so far: cleaned vent ductwork, cleaned, and inspected lint filter, removed front panel, thoroughly vacuumed interior with dryer attachment, replaced moisture sensors.
The dryer seems to heat and get hot, though not overheating. I suspect the problem could be that the thermistor is the problem.
I'm a broken down old combat Vet who relies on VA disability, so hiring someone to come out and fix it isn't on the menu.... :-(
Any pointers are greatly appreciated!!!!
For model number MEDB725BW0
Hi John, thank you for the question. Based on our understanding, we would recommend checking the dryer thermistor, part number PS11746740. It attaches on the blower housing, and monitors and helps regulate the temperature inside the dryer. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Larry, thank you for reaching out. The drive belt for your model is part number PS11748884, and the blower belt is part number PS11746333. We hope that helps!
My dryer starts without turning it on and has added time to its cycle and has ran with the door open. Could it be the control panel? Thank you!
For model number MEDB725BW0
Hello Jeff, thank you for getting in touch. The problem you described is most probably being occurred due to a malfunctioning control board. We would recommend checking the control board, part number PS11756075, to solve the problem. We hope this helps!
Hi James, thank you for contacting us. If you have ordered the dryer repair kit, part number PS373088, then this kit includes 1 belt, 4 drum rollers, 1 idler pulley wheel, and 9 triangle clips. It does not include two belts. We hope that helps!
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece in the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
The issue was the idler pulley. First I began opening up the front panel based on a youtube video but soon realized the model was slightly different and required a lot more items to remove. I saw the pulley in the back with nothing in the way so I put the front panel crap back on and removed the rear panel. There it was, very simple to remove and replace. I'm not looking forward to drum rollers though. Hopefully they're aren't as difficult as they appear.
