MED5920TW0 Maytag Dryer - Overview

Sections of the MED5920TW0

[Viewing 3 of 3]

Manuals & Care Guides for MED5920TW0

Click to download
Keep searches simple, eg. "belt" or "pump".
Multi Rib Belt - 92-1/4" – Part Number: 341241
Multi Rib Belt - 92-1/4"
★★★★★
★★★★★
(210)
PartSelect #: PS346995
Manufacturer #: 341241
This dryer drum belt has four ridges, three grooves and is 1/4" wide.
$18.61
  In Stock
Maintenance Kit – Part Number: 4392065
Maintenance Kit
★★★★★
★★★★★
(98)
PartSelect #: PS373087
Manufacturer #: 4392065
The drum support roller kit (Dryer Repair Kit) allows the dryer to tumble properly by supporting the drum cylinder. The idler pulley provides the tension required for a multi-ribbed belt. The belt att...
$51.13
  In Stock
Thermal Cut-Off Kit – Part Number: 279816
Thermal Cut-Off Kit
★★★★★
★★★★★
(41)
PartSelect #: PS334299
Manufacturer #: 279816
This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
$58.59
  In Stock
Dryer Thermostat Internal bias – Part Number: WP8577274
Dryer Thermostat Internal bias
★★★★★
★★★★★
(24)
PartSelect #: PS11746740
Manufacturer #: WP8577274
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$45.26
  In Stock
Dryer Door Switch – Part Number: WP3406107
Dryer Door Switch
★★★★★
★★★★★
(84)
PartSelect #: PS11741701
Manufacturer #: WP3406107
$34.59
  In Stock
Rear Drum Support Roller Kit – Part Number: 349241T
Rear Drum Support Roller Kit
★★★★★
★★★★★
(63)
PartSelect #: PS347627
Manufacturer #: 349241T
This dryer drum roller kit is designed to restore smooth and quiet operation in a wide range of dryer models. It includes two drum rollers, four tri-rings, and one to two retaining washers, providing ...
$22.56
  In Stock
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(9)
PartSelect #: PS1609293
Manufacturer #: 49621
Sold individually.
$11.20
  In Stock
Roller Support Tri-Ring – Part Number: WPW10512946
Roller Support Tri-Ring
★★★★★
★★★★★
(4)
PartSelect #: PS11755850
Manufacturer #: WPW10512946
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.01
  In Stock
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(23)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
  In Stock
LINT SCREEN ASSY, WOD – Part Number: W11778253
LINT SCREEN ASSY, WOD
★★★★★
★★★★★
(43)
PartSelect #: PS18355774
Manufacturer #: W11778253
This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a...
$64.85
  In Stock
Drive Motor with Pulley – Part Number: 279827
Drive Motor with Pulley
★★★★★
★★★★★
(28)
PartSelect #: PS334304
Manufacturer #: 279827
If your dryer drum isn’t spinning, the motor might be the issue. This replacement motor works with many Whirlpool-brand dryers made before 1996 and comes with the pulley already attached. It powers th...
$143.77
  In Stock
Rear Drum Felt Seal – Part Number: W10612022
Rear Drum Felt Seal
★★★★★
★★★★★
(25)
PartSelect #: PS8691753
Manufacturer #: W10612022
This seals Includes adhesive. This part helps seal the drum to prevent hot air from escaping.
$55.60
  In Stock

Questions And Answers for MED5920TW0

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the MED5920TW0

[Viewing 14 of 14]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing Fixing Fixing
Show All
Not Heating
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Too hot
Fixed by
these parts
Fixing Fixing Fixing
Show All
Marks left on clothes
Fixed by
these parts
Fixing Fixing Fixing
Show All
Running With Door Open
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Heat stays on after drum has stopped
Fixed by
these parts
Fixing Fixing Fixing
Show All
Light not working
Fixed by
these parts
Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door Pops Open
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing
Show All
Timer Not Working
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
door switch was bad
i was able to go on line with your company , find my dryer, order the part and had it the next day. fast , great , service
Parts Used:
Dryer Door Switch
  • pat from lisbon,, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
1032 of 1091 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
Parts Used:
Thermal Cut-Off Kit
  • Vernon from Niceville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
901 of 967 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer Would Not Turn Off With Door Open
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open and when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.
Parts Used:
Dryer Door Switch
  • RICHARD from NORCROSS, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
575 of 596 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!