This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$17.16
In Stock
Questions And Answers for MDE9316AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tommy
December 23, 2019
Unit makes a squealing noise when running not all the time but several times thru the cycle
For model number MDE9316AYW
Hello Tommy and thank you for writing.
It certainly sounds like a faulty drum roller PS1570070 you should check for signs of damage, and replace it if needed. You also should check your belt PS11741110 could be just loose or damaged as well. We hope this helps. Please contact us anytime.
The dryer unit buzzes when depressing the start button and it fails to start. The buzzing occurs whenever and as long as you hold the start button. The unit does not start. Wondering if this is the start button or if it's in the selection switch for the various modes.
For model number MDE9316AYW
Hello Jim, Thank you for the question. Normally this is an indication there is a bad motor relay and the Motor will need to be replaced. We hope this helps!
How do I disable the alarm on this dryer and where is it located not sure if it located in the Tumblr part or in the electronics on the very top
For model number MDE9316AYW
Hello Don, thank you for your question. The Buzzer switch PS2035482 is located in the electronics behind the control panel( #11 on our site in the Control Panel section ). We hope this helps.
Was this helpful?
Thank you for voting!
Ronda
March 16, 2023
If my dryer won’t heat up, does that mean the heat element went out ??
For model number MDE9316AYW
Hello Ronda, thank you for reaching out. According to our research, the issue might be with the thermal fuse, part number PS11740687, or the heating element, part number PS11740682. We would also suggest checking the thermostat, part number PS11740647, for continuity. We hope that helps!
Hello Angela, thank you for getting in touch. According to our research, the issue is most probably with the dryer drum support roller. It holds the drum in the proper position while it spins on the support wheels. The dryer drum support roller kit for your model is part number PS1570070. You may need to replace it to fix the issue. We hope this solves your problem!
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.