This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
$18.64
In Stock
Order within the next 1 hr and 3 mins and your part ships today!
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
$33.30
In Stock
Order within the next 1 hr and 3 mins and your part ships today!
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
$59.32
In Stock
Order within the next 1 hr and 3 mins and your part ships today!
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
$40.71
In Stock
Order within the next 1 hr and 3 mins and your part ships today!
Brighten up your appliance with this easy-to-install 10-watt light bulb, perfect for dryers and refrigerators. It gives off a clear, steady light so you can easily see inside when the door is open. Wh...
$22.77
In Stock
Order within the next 1 hr and 3 mins and your part ships today!
This idler pulley shaft washer is used with many clothes dryers. It is less than an inch long, and it is black in color.
$17.55
In Stock
Order within the next 1 hr and 3 mins and your part ships today!
Questions And Answers for MDE8000AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Duane
February 5, 2023
Dryer squeals when first started for approximately 30 seconds then quiets down and drys just fine. Will new belt correct the noise.
For model number MDE8000AYW
Hello Duane, thank you for the question. The issue seems to be with the Drum Support Roller Kit, we would suggest checking it, the part number is PS1570070. If that does not help, we would suggest checking the Roller Shaft, part number PS11743031, and Idler Pulley Wheel and Bearing, part number PS11743032. If you require assistance placing an order, please contact customer service. We hope that helps!
Hi Nate, thank you for contacting us. We would recommend checking the drum belt, part number PS11741110. It spins the dryer drum during the drying cycle. A broken or damaged belt might be causing this issue. We hope this information helps!
I need a dryer timer knob. Maytag dryer model number: MDE8000AYW
For model number MDE8000AYW
Hi Diana, thank you for reaching out. We have found that the timer knob for your model comes in three parts: timer dial skirt, part number PS11741055, timer knob base, part number PS11739297, and timer knob insert cap, part number PS11739300. We hope this information helps!
Lower door switch has pink white and blue wires how do they hook up
For model number MDE8000AYW
Hi Brian, thank you for the great question. We have a video on how to replace the door switch, part number PS1964648, please follow the steps to fix the issue. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.
