This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult....
The lower door seal prevents water leaks by sealing the gap between the dishwasher door and tub. Suitable for select Whirlpool and related brands, it’s ideal for restoring leak-free operation. Ensure ...
Having trouble with your dishwasher's water flow? Your problem could be a worn-out water supply manifold. This genuine Whirlpool Manifold Center Wash Arm Water Supply Manifold is here to help. It's a ...
Are you struggling with a faulty dishwasher? Your solution could be our Whirlpool Dishwasher Pump Hose. This authentic OEM part helps your dishwasher function just like new, ensuring a steady flow of ...
Have you noticed a leak in your dishwasher? Are you finding puddles of water after a cleaning cycle? Your problem could be a simple fix with the Whirlpool Hose Clamp. This hose clamp is an authentic...
This sensor monitors operating conditions within the appliance and relays accurate feedback to the control system. It plays an important role in regulating performance, safety, and efficiency. Replaci...
If your dishwasher isn’t cleaning the bottom rack like it used to, the lower spray arm might be the problem. This part spins during the wash cycle, spraying water to clean your dishes. It’s made from ...
$302.02
In Stock
Questions And Answers for MDB7949SDH3
Be the first to ask our experts a question about this model!
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
First off, this part does not look like a seal. It seems more like a trim piece. It is the only part along the bottom of the DW door so it is indeed a seal, and the DW was leaking after I replaced the seal around the tub and the door. First take off the inner panel of the door by removing the Torx screws on the edge and the hinges. Pay attention to which hole each screw came out because they are different lengths. Gently separate the inner panel being careful with the wires going to the detergent dispenser. The seal is held on by 5 small hex head screws on the bottom of the door panel. Remove the old one and install the new one. Put the door panel back together and on the hinges. Good luck.
