Models > MDB5600AWW

MDB5600AWW Maytag Dishwasher - Overview

Find Parts and Repair Help for MDB5600AWW.

If you know the repair part that will fix your dishwasher you can search through the list of all parts for MDB5600AWW or you can narrow down the list by entering in the part description or name. If you know where the part is located on the MDB5600AWW you can search for it by selecting one of the section diagrams below. We've also put together a list of symptoms common to your dishwasher so you can find the part you need based on the problem you are having. We've included all of our repair videos that apply to MDB5600AWW to help you easily complete your repair. You can search through the installation instructions, written by our helpful PartSelect.ca customers, to find more information on your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
CAD$40.26

Door Handle and Latch Assembly with Switches

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. NOTE: White ha...

CAD$13.35

Silverware Basket - Gray

This part has been redesigned by the manufacturer and is now a complete full basket with handle and covers.

CAD$9.37

Lower Wheel Assembly

This lower dishrack roller is less than two inches in diameter. It is made entirely of plastic.

CAD$27.96

Docking Station with Flappers

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

CAD$28.68

Wash Impeller

This impeller rotates and is used to force water up through to the spray arm.

CAD$42.44

Door Latch with Switches - NO Handle

This is the door latch and switches only. The handle is not included with this part.

CAD$119.10

Accumulator Filter

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty...

CAD$9.88

Wash Arm Cap

Sold individually.

CAD$80.19

Door Seal - Black

It provides a waterproof seal between the tub and the door.

CAD$74.76

VALVE-INLT

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken latch handle

  • Customer: Walter from Tucson, AZ
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 937 of 958 people found this instruction helpful
The hardest thing was figuring out that you only need to purchase the latch handle because it only comes as a complete latch assembly, why they even list the latch assembly as a separate part in the parts list stupid. (you get the handle and latch already put together and it cost less than the latch assembly without the handle). Anyway all you need to do is ... read more

Handle jammed and door wouldn't open on Maytag Quietseries 100 dishwasher

  • Customer: Philip from Carlsbad, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 544 of 559 people found this instruction helpful
I Followed others' instructions already posted to replace the whole handle assembly. In particular, use a big screwdriver placed against the bottom of the handle and whack the grip with the palm of your hand to get the handle to move back to the open position so you can open the door and start the job. I am no handyman, but this fix was easy, about 30 minu... read more

Door release latch handle was broken. The handle was deeply recessed into the door and the door was difficult to open.

  • Customer: Dave from Livonia, MI
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 517 of 519 people found this instruction helpful
Remove the 8 or 9 torx screws holding the inner and outer door assembly together (leave the bottom screws in), lift the old handle assembly out, transfer the switches to the new handle assembly, and reassemble door. read more