Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
Deal with your kitchen tasks like a pro with the Whirlpool Dishwasher Drain Pump. This critical component makes sure the water quickly and efficiently exits your dishwasher tub every time you wash you...
The Circulation Pump Filter Assembly helps maintain proper water circulation and filtration in dishwashers. Always disconnect the dishwasher from power before installation, and verify compatibility wi...
If you're having problems with the dishrack of your dishwasher, we've got the perfect solution. Our genuine OEM Front Dishrack Stop Clip from Whirlpool ensures your dishrack won't slide off the rail, ...
Meet the hardworking Center Wash Arm Assembly Manifold by Whirlpool! This is no ordinary replacement part; it's an authentic, manufacturer-approved component. It's perfect for many Whirlpool, Maytag, ...
Your dishwasher is one of the most trusted appliances in your home, but like any machine, it requires proper upkeep. The Whirlpool Tub Gasket is one little part that can make a huge difference. This g...
Has your Whirlpool dishwasher door been playing up lately? The culprit could be your Door Latch Strike. This small, yet essential component ensures your dishwasher door stays firmly shut while it's wo...
$26.58
In Stock
Questions And Answers for MDB4949SKW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
L F
September 12, 2025
What year was this built?
For model number MDB4949SKW1
Hi, thank you for reaching out. According to our research, your model was manufactured approximately in 2020. For a mode accurate result, we will require the serial number of the unit. Looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!
The valve has a plastic fitting to attach the the water line with a hose fitting. Was not carful enough with the original and damaged it attaching the water line. Ordered a replacement fitting. While it is possible to replace the water inlet valve without pulling the dishwasher out from the cabinet found it was easier to get at with the machine out. The video does and good job of showing the removal and replacing the valve. Easy job, don't be like me and be careful attaching the water line.
After unplugging the dishwasher, removing the water supply hose, and disconnecting the drain hose, I removed the dishwasher from under the cabinet. I turned the dishwasher on its side, exposing the drain pump. I removed the electrical connection wire by sliding the white keeper forward and then using a small screwdriver, I pushed in on the black clip securing the plug. I then found the clip holding the pump and rotated the pump from the sump area. I installed the new pump in the same way I removed it. Reinstalled the water line, pump hose . Put unit back and plugged it in. Turned on dishwasher. Works perfectly now.
