Models > MBV1976AAB

MBV1976AAB Maytag Refrigerator - Overview

Sections of the MBV1976AAB

[Viewing 4 of 4]

Manuals & Care Guides for MBV1976AAB

Click to download
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP98008545
Screw
PartSelect #: PS11747488
Manufacturer #: WP98008545
Sold Individually.
$10.35
  In Stock
MAGNET – Part Number: 11001188
MAGNET
PartSelect #: PS2001715
Manufacturer #: 11001188
  No Longer Available
Transformer – Part Number: WP11001154
Transformer
PartSelect #: PS11738264
Manufacturer #: WP11001154
The transformer is for a personal beverage vending machine.
$58.40
  Special Order
CAPACITOR – Part Number: W11105120
CAPACITOR
★★★★★
★★★★★
(1)
PartSelect #: PS12070925
Manufacturer #: W11105120
$360.40
  Special Order
Control, Electric – Part Number: WP11001124
Control, Electric
PartSelect #: PS11738263
Manufacturer #: WP11001124
This connector board is for a personal beverage vending machine.
$52.79
  Special Order
BUTTON – Part Number: 11001080
BUTTON
PartSelect #: PS2001615
Manufacturer #: 11001080
$21.94
  Special Order
Temperature Control Assembly – Part Number: 11001070
Temperature Control Assembly
PartSelect #: PS2001609
Manufacturer #: 11001070
Used with Personal Beverage Centers.
  No Longer Available
DISPENSER – Part Number: 11001185
DISPENSER
PartSelect #: PS2001713
Manufacturer #: 11001185
  No Longer Available
DISPENSER – Part Number: 11001187
DISPENSER
PartSelect #: PS2001714
Manufacturer #: 11001187
  No Longer Available
CNTRL-ELEC – Part Number: 11001202
CNTRL-ELEC
PartSelect #: PS2001729
Manufacturer #: 11001202
  No Longer Available
Key - Set of Two – Part Number: 11001081
Key - Set of Two
PartSelect #: PS2001616
Manufacturer #: 11001081
  No Longer Available
Electronic Control Board – Part Number: 11001115
Electronic Control Board
PartSelect #: PS2001647
Manufacturer #: 11001115
  No Longer Available

Questions And Answers for MBV1976AAB

Ask our experts a question about this model and we'll get back to you as soon as possible!

1 question answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Arturo
July 13, 2021
It won’t cool
For model number MBV1976AAB
PartSelect logo
Hello Arturo, Thank you for the question. With the information provided, this could be a defective Temperature Control Assembly. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Maytag SkyBox would not dispense
First removed the two screws that hold the flapper door switch in place. Then unplugged door from main unit and removed door. Removed the door gasket. Placed door face down on table and removed about 14 screws to expose the the plug end of the switch assembly.

Plug in the new switch assembly and thread thru hole. Reinstall the door panel. Reinstall the gasket. Reinstall the switch cover. Rehang the door and plug to main unit. The machine now properly dispenses cans.
Parts Used:
DISCONTINUED
  • James from Naples, FL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
14 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Machine reported a jam every time a can was dispensed
Removed fridge door by opening all the way and lifting up ( don't forgit to unplug wire harness)
Removed all screws on back side holding two faces together, replaced parts.
Parts Used:
CNTRL-ELEC DISCONTINUED
  • Joseph from Burlington, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Maytag Skybox LEDs flash won't dispense
Door flapper sensor malfunctions and will not dispensense more than 1 without reseting appliance by opening and closing the door. Remove 2 screws by sensor. Remove door seal. Under the door seal remove 14 screws that hold door facing on. plug new sensor cable into board and reassemble. Count on doing every 2 - 3 years. This part is destroyed by condensation so consider stocking up on it, who knows how long it will be available.
Parts Used:
DISCONTINUED
  • Mark from Mooresville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!