It is a genuine item that is supplied by the original equipment manufacturer for use with lawn mowers. The transmission wire guides the path of the belt between the pulleys. This part will provide an ...
This is an original part from Craftsman for use with Lawn Mowers. The mulching plug, when installed in the grass-discharge chute, converts the mower to mulching mode. The most common reason for replac...
I removed the rear wheels, then I removed the blade, then the motor, then the front wheel assembly. The bolts holding the front wheel assembly were rusted and rounded trying to remove them, so I cut them out with a grinder. Afterwards I removed the remainder of the screw with a pair of pliers. I also removed the Water jet cleanout nozzle, found it was cracked, ordered the part from PartSelect, along with the screws needed to attach the front wheel assembly. I cleaned the remaining parts and re installed them onto the new deck. First, I installed the front wheel assembly, then the motor, then sat the mower upright, installed the blade, then took the rear wheel assembly and aligned it and fastened it to the deck. Last piece was the water nozzle. I placed it in the recess for it, and fastened it with the bolt. Then I tested the mower, and it worked without issue. Afterwards I used the new clean out port to rinse the underside of the deck, and it worked well.
Can't do the repair. You sent me the two wing knobs I ordered, but no nuts. No one sells the nuts. I've driven all over trying to find them. Wasted my money and a lot of time. Zip ties are holding the handle on. I sent an email to customer service asking for the nuts, never heard a word from anyone. Another great example of how not to run a business.
