All Installation Instructions for LG Refrigerator LTN19315ST

old bushing worn and broken

removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....

Parts Used:

Bushing

Jerry from CORSICANA, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

21 of 39 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

two screws and done

part fit into slot and screwed them down

Parts Used:

Lower Holder Cover

Daniel from TROY, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

5 of 7 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

bottom door dropped slightly and bottom hinge area rubbing on steel door support

removed 3 fasteners for top door and placed freezer door aside, then removed 3 more fasteners on bottom refrigerator door and place that aside. replaced bushing on lower door bracket and reversed the above procedure to reinstall doors.

Parts Used:

Bushing

Louis from PHILADELPHIA, PA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set

10 of 22 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken clip that keeps the lower holder cover from falling off bottom of refregerator

Used a screwdriver to take off broken clip and then used same screwdriver to replace with new clip. Very easy.

Parts Used:

Lower Holder Cover

Renita from FORT MADISON, IA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Replace lower grill bracket

Pull off the grill cover and remove the 2 screws from the old part and simply screw in the new part. Don’t lose the screws there are no new ones with the new part. Replace cover.

Parts Used:

Lower Holder Cover

James from DICKSON CITY, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I had broken the glass shelf which covered the fruit and vegetable drawers.he replacement was perfect fit.

I merely placed the new shelf in. Nothing to it. No tools needed. The replacement glass was a perfect fit.

Parts Used:

SHELF,GLASS

CAROLE from COMPTCHE, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Frig door not closing on its own accompanied by grinding sound

IMPORTANT: REPAIR EASIER WITH ASSISTANT! Pull frig from kitchen cabinets & unplug. Remove food from freezer & frig doors. Have assistant hold freezer door closed against freezer. Remove hinge cap from top of freezer along with hardware using socket wrench. Carefully lift freezer door from hardware that joins the bottom of the freezer door to the top of the frig door. Rest freezer door upright off to the side. Have assistant open frig door & SUPPORT BOTTOM. Remove hardware from top of frig using crescent wrench & screwdriver. Carefully lift frig door off joint & lay on side to gain access to hardware on bottom. Remove hardware using a screwdriver & replace worn nylon bushing. Reverse disassembly steps. Remove frig & freezer door shelves & clean inside. Clean outside frig, especially the back vents. Clean the floor where frig lives & push back into place. Enjoy clean SELF-CLOSING, NON-GRINDING frig door!

Parts Used:

Bushing

Joseph from Pennsville, NJ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator not cooling. Fan and lights not working also.

In plug refrigerator. Pry old switch out with flat blade screwdriver. Disconnect wiring from old switch and plug into new switch. Push back into refrigerator. Plug unit back in. Lights and fan should now work. Check for cold air coming out in freezer.

Parts Used: