LT1037HNR (AT3AYOW) LG Air Conditioner - Overview
Sections of the LT1037HNR
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
FAN,AXIAL
PartSelect #: PS12747824
Manufacturer #: 5900A10009E
The condenser fan blade fits onto the air conditioner motor shaft. The fan blade helps circulate air over the condenser to cool the refrigerant before it enters in to the evaporator. This part is beig...
$102.77
In Stock
Install Part Assembly,Single
PartSelect #: PS3518390
Manufacturer #: 3127A20017E
$92.81
Special Order
Clamp,Spring
PartSelect #: PS3522762
Manufacturer #: 3H02932B
The fan blade clamp, also known as a clamp spring, are for air conditioners. The clamp supports the fan blade on the motor shaft. When the motor is running, it signals the shaft to turn and rotate, bu...
$10.29
Special Order
Room Air Conditioner Fan Bracket
PartSelect #: PS3524525
Manufacturer #: 4960A20005A
$47.57
Special Order
Questions And Answers for LT1037HNR
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken fan axial blade
Unscrewed the unit from the exterior case pulled out the unit unscrewed the 4 screw that hold the fan shroud carefully unscrewed the coil pulled back unclipped the axial fan clip gentlyhit with rubber mallet replacement of new fan replaced clip
15 minutes best investment of 20 bucks as apposed to 400 $
15 minutes best investment of 20 bucks as apposed to 400 $
Parts Used:
-
John from HARLINGEN, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
8 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Motor mount broke due to imbalance caused by mud dobber nests.
Pulled PTAC out of wall sleeve, unhook wire harness from control area, remove condenser shroud and motor and fan blade all at the same time. Replaced motor bracket and re-installed in reverse order.
Parts Used:
-
Travis from LOUISVILLE, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
window a/x unit fan broke
took apart the fan housing and replaced the fan saving me hundreds of dollars from buying a new unit
Parts Used:
-
margaret from CARRIERE, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
6 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!