LSU240H LG Air Conditioner - Overview
Sections of the LSU240H
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Damper,Compressor
PartSelect #: PS3525492
Manufacturer #: 4H00982E
$10.40
In Stock
Order within the next 8 hrs and your part ships today!
MOTOR ASSEMBLY,DC,INDOOR
PartSelect #: PS7785114
Manufacturer #: 4681A20172Q
This motor powers the fan in your AC’s outdoor unit, helping it cool properly. If your unit isn’t blowing cold air or won’t turn on, this part might be the fix. It’s made to fit specific LG models, so...
$436.42
In Stock
Order within the next 8 hrs and your part ships today!
Thermistor Assembly
PartSelect #: PS3622968
Manufacturer #: EBG61107109
$87.29
In Stock
Order within the next 8 hrs and your part ships today!
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
LG Mini Split Air Conditioner Error Code CH 46
Remove the main power disconnect. Remove the top cover and the fan-side side panel. Disconnect the thermister from the main circuit board located under top panel. Remove the two thermister sensors from the holders attached to suction piping. Install the new thermisters and reconnect the harness to the circuit board. Reinstall top cover and side panel. Reinstall main power disconnect. Verify that error code has cleared. Operate the system normally.
Parts Used:
-
Malcolm from Mt Pleasant, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
23 of 31 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Error CH 46 Suction Pipe Thermistor
Download PDF Multi Air Conditioner SVC Manual for LMU187HV,,, Disconnect the Power,,, Remove cover of the Outdoor Compressor, Remove black cover to the electronics board.. Find the Red Plug-in to the existing Suction Pipe Thermistor, replace with the new one, match each sensor (2) follow the leads one by one, remove the old attach the new ones... Replace covers then the Disconnect & Waa-Laa,,, Fixed
Parts Used:
-
Paula from Yantis, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ERROR 46 Thermistor error
I removed the front panel. Then opened case with circuit board and thermistor connections. Cut zip ties securing wires and thermistor. Removed old thermistor and replaced with new part. Placed new zip ties to secure wires. Reassembled.
Parts Used:
-
Justin from CHEHALIS, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!