LPF21PL (Type 0) Bostitch Nailer - Overview

Sections of the LPF21PL

[Viewing 1 of 1]
Page A Diagram and Parts List for Type 0 Bostitch Nailer
Page A
Keep searches simple, eg. "belt" or "pump".
O-RING – Part Number: 9R189688
O-RING
PartSelect #: PS12466873
Manufacturer #: 9R189688
$5.95
  Special Order
CONTACT ARM GUIDE – Part Number: 9R189714
CONTACT ARM GUIDE
PartSelect #: PS12466876
Manufacturer #: 9R189714
$5.95
  Special Order
UPPER CONTACT ARM – Part Number: 9R189715
UPPER CONTACT ARM
PartSelect #: PS12466877
Manufacturer #: 9R189715
  No Longer Available
BUSHING – Part Number: 9R189717
BUSHING
PartSelect #: PS12466878
Manufacturer #: 9R189717
$5.95
  Special Order
COMPRESSION SPRING – Part Number: 9R189686
COMPRESSION SPRING
PartSelect #: PS12466872
Manufacturer #: 9R189686
$15.56
  Special Order
RUBBER PAD – Part Number: 9R189726
RUBBER PAD
PartSelect #: PS12508045
Manufacturer #: 9R189726
$5.95
  Special Order
TRIGGER UNIT – Part Number: 9R189916
TRIGGER UNIT
PartSelect #: PS12508046
Manufacturer #: 9R189916
$27.00
  Special Order
CONTACT ARM ASSY. – Part Number: 9R189719
CONTACT ARM ASSY.
PartSelect #: PS12510702
Manufacturer #: 9R189719
  No Longer Available
RUBBER PAD – Part Number: 9R189725
RUBBER PAD
PartSelect #: PS12510703
Manufacturer #: 9R189725
$5.95
  Special Order
PISTON DRIVER ASSY. – Part Number: 9R189691
PISTON DRIVER ASSY.
PartSelect #: PS12512282
Manufacturer #: 9R189691
  No Longer Available
O-RING – Part Number: 9R189693
O-RING
PartSelect #: PS12512283
Manufacturer #: 9R189693
$5.95
  Special Order
SCREW-SHCS-M5X0.80X1 – Part Number: MSC5080-16
SCREW-SHCS-M5X0.80X1
PartSelect #: PS12522768
Manufacturer #: MSC5080-16
$5.95
  Special Order
Back to Top
View More

Questions And Answers for LPF21PL

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
would not fire nails
remove 2 Philips head screws, drive out drift pins with drill bit. Remove TVA6 replace with new TVA6 making sure TVA6 is completely seated and slots are aligned with drift pin holes! Drive in drift pins. Replace trigger and screws.
This did not solve the problem as suggested by Parts select.
Replaced Head Valve Seal...Problem resolved
Parts Used:
KIT-TRIGGER VALVE
  • Richard from Bogalusa, LA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More