LMX21986ST (ASTCNA3) LG Refrigerator - Overview
Sections of the LMX21986ST
[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Front Plate Assembly
PartSelect #: PS12374439
Manufacturer #: AGU75188619
If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to kee...
$200.17
In Stock
Water Inlet Valve Assembly
PartSelect #: PS3533117
Manufacturer #: AJU72992601
This includes the primary and secondary valves along with the wire harness.
$269.48
In Stock
Refrigerator Ice Maker Kit Assembly
PartSelect #: PS9865155
Manufacturer #: AEQ73110210
This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug...
$275.18
In Stock
Door Shelf Bin
PartSelect #: PS8748031
Manufacturer #: AAP73871501
Sold individually.
$74.37
In Stock
Door Gasket - Gray - Right Side
PartSelect #: PS8737433
Manufacturer #: ADX73550624
This door gasket is used to make an air-tight seal for the cabinet when the door is closed
$74.71
In Stock
Evaporator Fan Motor
PartSelect #: PS3523323
Manufacturer #: 4681JB1027C
This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh ...
$243.17
In Stock
Refrigerator Spring
PartSelect #: PS6012670
Manufacturer #: MHY62044106
If your French-door fridge isn’t sealing like it used to, this mullion spring could be the fix. It helps the flap between the doors close smoothly and stay in place, keeping cold air in and frost out....
$57.49
In Stock
Secondary Water Inlet Valve
PartSelect #: PS6448332
Manufacturer #: MJX41869202
This valve helps your fridge deliver water to the ice maker and dispenser. If you’re not getting ice, the dispenser isn’t working, or you hear strange noises, this part might be the fix. It’s easy to ...
$132.70
In Stock
Refrigerator Button Assembly
PartSelect #: PS3637215
Manufacturer #: ABH74499601
Looking to get your LG refrigerator back to top shape? Our genuine LG Refrigerator Button Assembly might be just the solution you need. This OEM item has been specially designed to work seamlessly wit...
$75.80
In Stock
Questions And Answers for LMX21986ST
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the LMX21986ST
[Viewing 10 of 10]Door won’t open or close
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replace leaking water inlet valve assembly
1. Shut off water to refrigerator. 2. Removed bottom sheet metal cover (6 screws). 3. Removed leaking water inlet valve assembly from refrigerator (1 screw). 4. Remove water inlet tube (loosen nut) and tube back to refrigerator (pull from water valve after remove cotter pin washer). 5. Detach two electrical wire harnesses. 6. Install new water inlet valve assembly to refrigerator (1 screw). 7. Replace both water tubes to water inlet assembly. 8. Re-attach both wiring harnesses. 9. Turn water to refrigerator on. 10. Check for leaks. 11. Re-attach bottom sheet cover (6 screws).
Parts Used:
-
Richard from JACKSONVILLE, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
40 of 70 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The factory door gasket was split and needed replacing
I pulled the gasket off and installed the new one. It was very easy. All I had to do was to push the new gasket in place in the grooves in the door. The gasket I received was identical to the one I replaced.
Parts Used:
-
Carl from LAKE WYLIE, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
22 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My nephew accidentally forced the door closed last year, which resulted in the door having to be re closed manually folding back the flap. Ugh!
Unscered 2 screws, unplug electrical connection under the screws, slide her flap into grooves, realign screw holes , and rescrew in. Done.
Parts Used:
-
Tiziana from WARWICK, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
25 of 46 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!