This is replacement vent grille or vent grill for your microwave. You will find the grill vent either above or below the microwave door, depending on your model. If your vent grill is discolored or cr...
The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with...
This catch lock is designed for use with slide-out microwave oven hoods and plays a crucial role in securing the hood in place. If the lock is broken or malfunctioning, it may prevent the microwave do...
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
This metal vent damper door closes off the exhaust duct when the fan is not running to stop outside air from entering the microwave unit, and opens when the fan turns on to allow air to vent away from...
This part is the replacement base plate trim, also known as the front décor for your microwave. It is gray in color and is approximately 30 inches long and 1 ½ inches wide. The base plate trim forms a...
This charcoal filter in manufactured to fit a microwave. It removes food odors from the air circulating through your appliance vent. Youi may need to replace this part if you notice odor when cooking ...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill
February 11, 2022
Microwave runs but makes very loud humming noise and doesn't heat
For model number LMH2016ST
Hello Bill, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the door switches, the diode, and the thermostats. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. For safety reasons, since the microwave capacitor can still store electricity even when the microwave is unplugged, it is usually advised that you discharge the capacitor before any attempt at repair. We have included a link on how to do so.
https://www.partselect.com/Microwave+discharge-capacitor+repair.htm
We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
One of the two lights on the bottom of the unit (shines on the stove below) is out. We can not figure out how to get access to the bulb to replace it?
For model number LMH2016ST
Good Day William. Thank you for your question in regards to your unit (Model Number LMH2016ST). You will need a Phillips head screw driver in order to do this. Ensure that before you do anything that you have unplugged your unit from its power source for purposes of safety. You will see a small rectangular tray/cover that you will need to unscrew the screws from, make sure you put the screws in the safe place so that they don't get lost. After removing the cover you will be able to see the light bulb, you can unscrew the bulb from the socket and replace it. After place the cover back on and screw the screws back in. Then you are good to go. Hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
September 13, 2021
Our microwave has stopped heating, the control panel all seems to work fine, the clock works fine.The unit doesn’t turn on or respond to touchpad.
it does run at a real slow output when the door is open???
can this be repaired? does it need a new control touchpad or is there a fuse?
help
rick
For model number LMH2016ST
Hello Rick, thank you for writing. There are a few options starting with the most likely. Micro Switch PartSelect Number PS3522738. This microwave door switch provides power to the various components in the microwave when the door is in a closed position. SWITCH,MICRO PartSelect Number PS3598700. PCB ASSEMBLY,MAIN PartSelect Number PS3645595. Good luck with your repair.
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Leave the unit installed. Remove 8 screws, 4 on each side of the bottom of the drawer. It is hinged on the back but front will drop down. Remove screws attached to the white slide rails but hold bezel assembly so the spring metal on each side do no break. Look in assembly from the back to front. With a long Phillips remove the screws holding the bezel on. 3 screws. Remove old Bezel. Put new on and reassemble using the reverse.
Repair was easy but you have to remove the screw at the top of the microwave (top left) in order to secure the far left tab with the hole in the tab. Place the grille in place, push to the left and then secure the screw you removed. Just remember that the mounted screw will need to be removed the next time you need access in order to replace the charcoal filter.
