LMC2075SW LG Microwave - Overview

Sections of the LMC2075SW

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Glass Cooking Tray – Part Number: 3390W1G006B
Glass Cooking Tray
PartSelect #: PS3556215
Manufacturer #: 3390W1G006B
Is your LG microwave no longer cooking evenly? You may need a new Glass Cooking Tray. This authentic LG tray helps rotate the food at the center of your microwave, getting it heated perfectly every ti...
$111.48
  In Stock
Order within the next 3 hrs and your part ships today!
Motor Synchronous – Part Number: 6549W1S011B
Motor Synchronous
PartSelect #: PS3529208
Manufacturer #: 6549W1S011B
$48.07
  In Stock
Order within the next 3 hrs and your part ships today!

Questions And Answers for LMC2075SW

Be the first to ask our experts a question about this model!

Common Symptoms of the LMC2075SW

[Viewing 2 of 2]
Tray won’t turn
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Motor Burned Out On Turntable
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No trip to home depot today.
Parts Used:
Motor Synchronous
  • Steven from Oak Forest, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
37 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Arcing had caused burned turntable and melted connection to sec. motor.
Note: also had to replace turntable. Removed top cover using secure driver set. Placed microwave on it's front, using a soft towel. Removed edge screws from bottom plate (leaving 4 screws in center attached to heavy transformer). Separated bottom plate from body of microwave (leaving transformer wires still attached) exposing Synchronous motor. Removed two screws holding motor and electrical plug. Swapped new motor in its place. Re-attached bottom plate with its screws. Placed microwave onto it normal position. Re-attached top cover with its secure screws. Installed new turntable inside.
Parts Used:
Motor Synchronous
  • John from MOUNTAIN VIEW, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Turntable stopped turning
Removed micro bottom - 5 screws. One screw on the motor and a clip. Reversed the sequence, turned it on and watched it turn.
Parts Used:
Motor Synchronous
  • Ed from MILLS RIVER, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!