This grey OEM dishwasher tub gasket is a 73" grey rubber part that creates a seal around the dishwasher to prevent any water leakage during a cycle. If it's damaged or broken, you'll start seeing wate...
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, o...
This door seal is for dishwashers.
Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.
After installing the door seal, shut the dishwasher door and ...
This plastic cover and stem assembly helps hold the lower spray arm in place.
$39.53
In Stock
Questions And Answers for LFID2426TF5A
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Terry
September 7, 2021
The door lock won't retract so i can't close the door to operate it.
For model number LFID2426TF5A
Hello Terry, thank you for your question. We have researched the model you have provided, and we would suggest the door latch, part number PS16218716. We hope this helps!
The dishwasher is shutting off mid cycle and not draining. The electrical connection is good but it seems like a fuse that is causing it to shut off.
For model number LFID2426TF5A
Hi Cameron, thank you for contacting us. We believe your dishwasher is having this problem due to a faulty door latch, part number PS16218716, which may need to be replaced. We hope this helps, good luck with the repair!
Hi Michael, thank you for contacting us. Based on our understanding, we would recommend checking the door latch assembly, part number PS16218716. You may need to replace it to fix the issue. We hope this information helps!
The center spray arm fell off. I see where it fits back in, but the hole is small and round and the connection for the spray arm is large and oblong. How do I get it back in there?
For model number LFID2426TF5A
Hi David,
Thank you for your question. Here is a link to one of our YouTube videos that you may reference for information on how to install the center spray arm, https://www.youtube.com/watch?v=7TV0f1yMZhU. The dishwasher and center spray arm in the video may not be the same as yours, but it will give you a general idea on how to install the part. We hope this helps!
I removed old tub gasket, which the door presses against to make a seal, and put the new one in. Flat tip screwdriver was used to gently press gasket in.
I looked under and found that 2 brass nuts that secured the heater element through the base housing of the dishwasher has split down each side of the nut and no longer was tight enough to keep water from leaking around either end of the heater element. I powered down the dishwasher at the circuit breaker and then reached under the dishwasher and pulled away the 2 wires that were attached to each side of the heater element. I removed the two nuts and replaced them with the parts I ordered from partselect.com. I then put the appropriate wires back at the end of the heater element and ran the dishwasher to check for leaks. No leaks... it was fixed.