This 40-watt appliance light bulb is a reliable replacement for use in select ranges, refrigerators, freezers, and microwaves. It provides bright, consistent lighting to help you see clearly inside yo...
Sold individually. This part helps the flame to spread for even heat. Also protects your burner head from spills. The surface burner cap is located on the top of the burner head and is used in ranges ...
This part is a replacement electronic clock/timer for your oven. The clock timer will display the time, and can be used to set a timer. If the clock will not start, will not allow you to program the t...
The oven burner igniter ignites the gas to light the oven burner. Possible Repair Solution For: Will not start, no heat, not enough heat.
$195.50
In Stock
Questions And Answers for LFGF3052TFA
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Todd
December 27, 2022
Oven quit working ,cannot be reset and digital display is half working
For model number LFGF3052TFA
Hello Todd, thank you for contacting us. The issue is most probably related to a faulty control board, part number PS12717913. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Hi Victoria, thank you for your inquiry. Based on our research, your model does not come with the top broiler element. It comes with the broiler drawer. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lee Ann
December 7, 2019
Oven gets too hot while baking
For model number LFGF3052TFA
Hi Lee Ann, I recommend replacing the temperature sensor. Thank you for your question and good luck with your repair!
I need the part to change from natural gas to propane. Oven
For model number LFGF3052TFA
Hello Deb, thank you for reaching out. The LP Conversion Kit listed under your model is part number PS3419381. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Hello Wayne, thank you for your question. If all of your igniters are sparking at the same time, this would lead us to believe there is an issue with the spark module, PartSelect number PS11770793, or the surface burner ignition harness, PartSelect number PS3409147. Unfortunately, the ignition harness is discontinued per the manufacturer and we have no alternate part showing as a replacement in our system. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I am an HVAC tech by trade so it wasn't difficult to diagnose problem with safety valve. The hard part was being without an oven for a week. Repair was simple and effective--oven works good as new. Shut off gas and unplugged oven. Removed floor of oven between broiler and bake section, used wrenches to disconnect gas line from safety valve in back of oven, used philipps head screwdriver to remove burner assembly and gas valve, reversed process to replace. Checked out operation--OK.
The repair of the oven was really easy . I removed a total of 7 screws with a 1/4 inch nut driver to remove the back cover of the instrument panel. I then unplugged the wires from the from the oven control and with a phillups screw driver I removed 4 screws that hold the oven control,the face plate with the words on it has to be taken off the old control and put on the new one . I then installed the new oven control by putting the 4 screws back on and plugging back the wires. I then replaced the back cover with the 7 screws and plugged the power back in the outlet, The clock has to be adjusted and your done.
Turned off power, took back off stove removed old probe. I had to splice wires since new probe ends did not match up. the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wires. After waiting, I turned the breaker on and my range came back on.
