KXU8030YSS1 KitchenAid Range Hood - Overview
Sections of the KXU8030YSS1
[Viewing 2 of 2]
Keep searches simple, eg. "belt" or "pump".
Range Hood Control Panel
PartSelect #: PS12728687
Manufacturer #: W11387938
The Control panel houses the selection buttons for the range hood.
$167.66
In Stock
SWTCH-SLDE
PartSelect #: PS16660546
Manufacturer #: W11569415
This range hood slide switch is designed to control key functions such as fan speed or lighting through a smooth, easy-to-use sliding mechanism. Installed behind the control panel, it allows users to ...
$38.60
In Stock
Control Slide Switch
PartSelect #: PS16875964
Manufacturer #: W11662407
This control slide switch allows users to manually adjust or activate specific appliance functions through a simple sliding motion. It provides reliable mechanical input to the control system and is o...
$48.68
In Stock
BLOWER-FAN
PartSelect #: PS11752224
Manufacturer #: WPW10293966
Tired of a range hood that isn't doing its job? Meet the Whirlpool Blower Fan, your dependable partner designed to restore the efficiency of your favorite household appliances. This is a genuine, orig...
$619.84
In Stock
Switch
PartSelect #: PS11731241
Manufacturer #: W10853393
Unveiling the Whirlpool SWTCH-RCKR Fan Control Switch ? a vital replacement part for your range hood. This genuine OEM component sparks life into your fan motor, allowing it to whisk away smoke and wa...
$132.30
In Stock
Questions And Answers for KXU8030YSS1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
one switch went out on the range hood controlling the lights.
The repair did not happen. Parts select sent me the wrong part. They sent a cover plate without any switches.
I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!
I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!
Parts Used:
-
Jeffrey from MILTON, FL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
SWITCH CONTROL UNIT HAD BROKEN OFF FROM ONE END OF ITS INTERIOR MOUNTING
Removed and cleaned to overhead grease trap filters which required a sink full of detergent some wire wool pads and and much elbow grease. This is probably a service task that should be performed at least annually for hoods in frequent use. And be careful not to cut your fingers on some of the sharp interior edges.
With the grease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.
Refitting was the reverse of the above process.
With the grease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.
Refitting was the reverse of the above process.
Parts Used:
-
NICHOLAS & LEIGH from CHARLOTTE, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Control panel broken
Amazing. PartSelect shipped me the wrong part and then wouldn't refund shipping cost to return it. They need to change their shipping policy as it now states they refund shipping if they were the cause of the mistake.
Parts Used:
-
Brian from LEANDER, TX
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!