This is a replacement seal for your blender. The seal prevents leaking when you have contents in the blender. If your blender is leaking or is not properly connecting to the stand, you may have a dama...
$11.41
In Stock
Order within the next 1 hr and 28 mins and your part ships today!
Need a new jar for your blender? This 56-ounce plastic jar comes ready to go—with blades, seals, and the drive spline already in place—so you can get back to making smoothies, soups, and more. It’s de...
$167.09
In Stock
Order within the next 1 hr and 28 mins and your part ships today!
Your Whirlpool blender or mixer plays an important role in your kitchen, right? So, when it stops working effectively, it's a real hassle. Luckily, the Whirlpool Collar with Cutting Blade is here to g...
$114.83
In Stock
Order within the next 1 hr and 28 mins and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mo
April 7, 2023
AFTER TAKING APART TO CLEAN.... DOES THE GLASS PORTION "CLICK" ONTO THE BASE?? WHEN I PUT IT ON THE BLENDER WORKS BUT DOES NO LONGER "CLICK' INTO PLACE....WHAT WOULD BE THE PROBLEM? THANK YOU
For model number KSB655CER1
Hello Mo, thank you for reaching out. According to our research, you need to press down and rotate the pitcher or the jar clockwise, approximately 1/4 turns through two steps of resistance. Please submit a new question if you have any follow-ups!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I didn't realize there was a spoon in the blender and it made a total racket as the blades and housing were falling apart. The blender jar, blades and housing are all one piece so my less than 2 month old blender was completely trashed. Rather than spend $100 on a new blender, I spent $24 on a new jar... popped it on the blender in place of the old one and it's better than new! And I'm much more careful using it!
Put masking tape around the coupling and put the coupling in a vise upside down. took the bottom apart and unscrewed the main shaft screw. ITS LEFT HAND THREAD!!! Screw on new coupling and put the bottom back on.The masking tape is just to protect the finish.
Just swapped out parts and no more leak. I figured out the leak was around the blades and the nut holding it together wasn't staying tight. New parts fit perfect. No tools.
