KSB465WH1 KitchenAid Blender - Overview
Sections of the KSB465WH1
[Viewing 2 of 2]
Manuals & Care Guides for KSB465WH1
Click to downloadKeep searches simple, eg. "belt" or "pump".
Mixer Coupling
PartSelect #: PS11751771
Manufacturer #: WPW10279256
This part sits on top of the motor.
$14.54
In Stock
Lid Assembly - Elephant (Matte Gray)
PartSelect #: PS2348467
Manufacturer #: W10183713
$60.63
Special Order
Screw
PartSelect #: PS11748102
Manufacturer #: WPW10068250
This screw is sold individually.
$11.35
Special Order
Questions And Answers for KSB465WH1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
April 11, 2023
What is the rotation speed when using the liquify setting or this blender?
Thank you
For model number KSB465WH1
Hi Richard,
Thank you for your question. We do not have the specifications for liquefy, but blenders can spin between 17000 and 30000 rpm's. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the KSB465WH1
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The driver (coupling) on my Kitchenaid Blender disintegrated.
I decided to see if I could dislodge the faulty coupling. I placed a screw driver under the coupling and pushed up. It dislodged. Subsequently I found a youtube video that indicated that was exactly what I should do.
I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
Parts Used:
-
Daniel from Geneseo, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
8 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer went out would just run and run
-
William from MOUNT MORRIS, MI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coupling got chewed up
to replace the coupling you take the bottom off the blender and loosen the screws that hold the bracket and fan -then comes the hard part-the shaft screw is bolted through every bit of the guts then into the coupling. It is a lefthand thread. I ended up having to fabricate a piece of metal that slipped into the top of the coupling (in the teeth.) Then I secured the metal piece-it was just a twi inch piece of steel- in the vise, I held the blender and I got a big guy to attack the shaft bolt with a bunch of pressure and a straight screwdriver. It finally popped and I was able to unscrew the old coupling and replace it with the new. Reminds of when guys put on lug nuts and I have to try and get them off. But I saved at least $100.
Parts Used:
-
shelley from Homer, AK
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!