Models > KSB3AC0 > Instructions

KSB3AC0 KitchenAid Blender - Instructions

All Instructions for the KSB3AC0
1 - 7 of 7
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
After sitting on my kitchen counter for nearly 42 years the rubber feet left foot prints.
We:
tipped the mixer over on its side
pulled the old feet off
put the new feet in place and pounded them w/our fists
set it back up on its new feet
smiled
Parts Used:
Blender Foot
  • Susan from Gig Harbour, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The 5 feet on my Kitchen Aide, had worn out
Took the old feet (5) off and put new on the Kitchen Aide, looks great. Stands high and your assistance on the phone, was so appreciated.
Parts Used:
Blender Foot
  • Beverly from Post Falls, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing pedestal foot
Turned the mixer on its side and slid the part into the bottom of the base.
Parts Used:
Blender Foot
  • Michael from CARLISLE, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old seal was worn and stained.
Removed old seal; tucked new seal into place. Took seconds. What impressed me was how easy it was to order and how quickly it arrived. PartSelect.com is now my "go to" for future parts needs.
Parts Used:
DISCONTINUED
  • Claudia from Banning, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing lid seal
We ordered a seal for the lid of our KitxhenAid Blender .
It was shipped in one day and we got it the next day.
Perfect service!
Parts Used:
DISCONTINUED
  • GREGORY from FRISCO, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lost a rubber foot on my Kitchen Aid mixer. The remaining feet we're hard and mushroomed. I decided to replace all 5. That was the correct decision.
I griped each foot with a pliers and twisted it out of its setting. I then set a new foot in place and hammered it into place with a small hammer. The feet fit snugly and did not need to be glued. Job was easy and mixer sits like new. I was glad I spent the money to replace all of the feet at once.
Parts Used:
Blender Foot
  • Dale from Manheim, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
seal failure - it broke
First I removed the new seal from its packaging. Then I placed it on the interior lid perimeter, carefully tucking the outer seal edge under the restraining tabs. It was a perfect fit. To celebrate, I made margaritas.
Parts Used:
DISCONTINUED
  • edward from eau claire, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KSB3AC0
1 - 7 of 7
Back to Top