KRFF302EWH01 KitchenAid Refrigerator - Overview
Sections of the KRFF302EWH01
[Viewing 10 of 10]
Keep searches simple, eg. "belt" or "pump".
Refrigerator Center Crisper Drawer Slide Rail - White
PartSelect #: PS11757048
Manufacturer #: WPW10671238
This center crisper drawer rail supports the edges of refrigerator crisper drawers, ensuring smooth sliding and proper alignment. At 13.5 inches long, it fits between the drawers on the shelf frame. Q...
$72.26
In Stock
Crisper Drawer Cover Support
PartSelect #: PS11743468
Manufacturer #: WP67001716
This crisper drawer cover support is for refrigerators.
Crisper drawer cover support supports the crisper drawer lid.
Wear work gloves to protect your hands when installing this part.
$14.62
In Stock
Refrigerator Water Filter
PartSelect #: PS11722130
Manufacturer #: EDR4RXD1
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
$49.99
In Stock
Refrigerator Pantry Drawer Lid
PartSelect #: PS11723195
Manufacturer #: W10827914
This OEM pantry door cover is designed to fit the pantry compartment of various refrigerator models, providing both protection and visibility. Constructed from durable white plastic, it features a tra...
$181.08
In Stock
P-Trap Drain Tube Kit
PartSelect #: PS8691807
Manufacturer #: W10619951
Also known as a duck bill. This kit includes the tube extension piece and spacer.
$53.22
In Stock
Refrigerator Ice Maker Assembly
PartSelect #: PS11765620
Manufacturer #: W10884390
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
$133.72
In Stock
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Drawer Slide Rail End Cap Set
PartSelect #: PS12578233
Manufacturer #: W11197396
This drawer slide rail cover is for refrigerators.
Drawer slide rail cover is a decorative trim that covers the slide rail.
Wear work gloves to protect your hands when installing this part.
$57.20
In Stock
Door Gasket - Gray
PartSelect #: PS11759515
Manufacturer #: W10830162
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
$219.46
In Stock
Refrigerator Water Filter Bypass
PartSelect #: PS12731165
Manufacturer #: W11395888
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
$55.88
In Stock
Refrigerator Crisper Pan
PartSelect #: PS11743501
Manufacturer #: WP67002633
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators.
T...
$154.35
In Stock
Refrigerator Door Bin
PartSelect #: PS11753892
Manufacturer #: WPW10371194
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
$76.94
In Stock
Questions And Answers for KRFF302EWH01
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
March 9, 2023
Water line to water dispenser keeps freezing up
For model number KRFF302EWH01
Hi John, thank you for contacting us. Please make sure there is no issue with the water line connections, clogging, and water pressure. If the issue persists, we would recommend taking a look at the air damper assembly, part number PS11756641, the water filter head, part number PS12712109, and the water inlet valve, part number PS11754529, to see if these working or not. We hope this information helps!
Was this helpful?
Thank you for voting!
Related Parts:
Refrigerator Water Inlet Valve Assembly
$151.11
In Stock
Refrigerator Air Damper Control Assembly
$164.98
In Stock
Filter Head
$118.45
In Stock
John
March 10, 2023
Water dispensor keeps freezing up . Temp inside fridge is 38,freezer is -1
For model number KRFF302EWH01
Hello John, Thank you for your inquiry. Researching the model number that you have provided, we would recommend checking the thermistor, defrost heater, the defrost thermostat with wire harness, and the control board. Check the control board for any visible damage or loose connections. You can test the other parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Refrigerator Thermistor
$129.44
In Stock
DEFROST HEATER
$113.78
In Stock
Refrigerator Electronic Control Board
$472.14
In Stock
Wire Harness
$75.04
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the KRFF302EWH01
[Viewing 21 of 21]Leaking
Fixed by
these parts
these parts
Show All
Door won’t open or close
Fixed by
these parts
these parts
Show All
Light not working
Fixed by
these parts
these parts
Show All
Ice maker not making ice
Fixed by
these parts
these parts
Show All
Not dispensing water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Ice maker won’t dispense ice
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Ice maker dispenses too little ice
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Ice maker dispenses too much ice
Fixed by
these parts
these parts
Show All
Too warm
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Won’t start
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Parts Used:
-
Douglas from Byron, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
914 of 1047 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked & Snapped Center Crisper Rail
A very easy fix took all of five minutes
Parts Used:
-
Ruth from Roxbury, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
229 of 254 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Parts Used:
-
Jake from Novato, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
214 of 332 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!