This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
$49.99
In Stock
Order within the next 6 hrs and your part ships today!
The crisper drawer in your refrigerator is used for storing various items. If you notice that your current crisper drawer is damaged, you may need to replace it. You may notice that your refrigerator ...
$152.80
In Stock
Order within the next 6 hrs and your part ships today!
This replacement end cap supports the pantry drawer on the right side of your refrigerator, helping it slide and stay in place properly. It mounts to the inside wall and is essential for keeping the d...
$58.16
In Stock
Order within the next 6 hrs and your part ships today!
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
$182.02
In Stock
Order within the next 6 hrs and your part ships today!
This ice maker assembly is designed to produce and dispense ice efficiently within the freezer compartment of compatible refrigerator models. It includes a built-in shut-off arm and a wire harness for...
$133.72
In Stock
Order within the next 6 hrs and your part ships today!
This left-side pantry end cap, also referred to as a drawer support or door shelf trim, is designed to secure items on the interior door shelf of your refrigerator. Sold individually, it snaps into pl...
$62.55
In Stock
Order within the next 6 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 6 hrs and your part ships today!
If your fridge door is sweating or hard to open and close, the gasket might need replacing. This gray magnetic gasket helps seal the door tightly to keep cold air in and warm air out. It runs along al...
$219.46
In Stock
Order within the next 6 hrs and your part ships today!
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
$55.88
In Stock
Order within the next 6 hrs and your part ships today!
Running out of space in your fridge door? This clear, shallow bin is perfect for organizing jars, bottles, and small items. It’s made from sturdy plastic and fits right into the door—no tools needed. ...
$76.94
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for KRFC300ESS03
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pawan
January 7, 2024
My freezer light not working
For model number KRFC300ESS03
Hello Pawan, thank you for getting in touch. Based on the description that you have provided, we would recommend replacing the LED light, part number PS16731134, to fix the issue. We hope this solves your problem!
Freezer door seal not sealing along top, ice forming on top of door
For model number KRFC300ESS03
Hi Ken,
Thank you for your question. If the freezer door is not sealing, this allows moisture to get inside the freezer. The moisture then turns frost and over time a buildup of ice occurs. You will need to replace the freezer door gasket. The part number listed under your model number for the white freezer door gasket is PS3651286. The part number for the black freezer door gasket is PS3651266. The part number for the Apollo gray freezer door gasket is PS8688875. If you would like to place an order for one of these gaskets, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
I need to replace the temperature control thermostat. Where can I find one for this model?
For model number KRFC300ESS03
Hello Cookie, Thank you for the question. On this model the temperature is controlled by the Control Board, PartSelect Number PS11757366. We hope this helps!
I have a refrigerator/freezer (the freezer is a deep slide-out compartment on the bottom). It is no longer lighting. I assume that's because of a burned out bulb? Please tell me if that's the probable problem, and, if so, whether or not you have a bulb, and an instruction manual for replacing it. Thank you.
For model number KRFC300ESS03
Hi Jim, thank you for reaching out. We suggest you take a close look at the door switch, part number PS12731166, to fix this issue. The door switch needs to be checked first before replacing the light bulb. We hope this solves your problem!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
Removed door and crisper pans. Removed nuts on left end cap - think there were 3. Removed nuts on right end cap and one or two on back air regulator attached to right end cap. Replaced left end cap with new one using reserved nuts. Carefully removed back air regulator from right end cap. Attached back air regulator to new right end cap. Replaced right end cap and back air regulator and attached with nuts. Carefully inserted pantry door into pin on one side and slightly bent both right and left pins to insert door fully into end caps. Replaced crisper pans. That's it.
