KHMS2056SSS4 KitchenAid Microwave - Overview

Hello Tom, Thank you for your question. Our sources suggest replacing the light socket for your model under part PS1961309 to fix the light issues. We hope this helps!

Hi Tom. It is not very difficult. To install the socket you will have to remove it from all power and if it is attached to a wall remove it and put it onto a stable surface. Then you will have to remove the back panel by removing all the back panel screws. Lower the back panel making sure it does not fall out. Disconnect the wire harness that goes to the light bulbs. To unplug the wire all you have to do is squeeze each side to release the locks and disconnect it. Set the back panel aside. There will be two lock sockets on each side of the back panel. Remove the wire harness from the socket. There may be a tab you will have to push in and a screw you will have to remove. Pull the light socket out of the housing carefully. Unscrew the bulb so you can put it into the new socket. Put the bulb into the new socket then feed back into the housing. Put the screw that holds it on in and bend the tab back over to secure the socket. Then reconnect the wire harness. Repeat this process for the other socket. Then you can put the panel back onto the microwave. Reconnect the wire harness for the light sockets. Lift the panel up and put the screws back in. Thank you for your question and good luck with your repair!

Hi Janet, thank you for your inquiry. According to our research, there are two filters at the above-mentioned location. The charcoal filter, part number PS1957304, and the grease filter, part number PS1957303. We hope this information helps!

Hi Scott, thank you for your question! To remove the halogen light bulb, part number PS886465, you may pull the bulb out. Once the old light is removed, you can push in the new light. We hope this information is useful!