This is a package of 2 filters. The charcoal filter is used in microwaves to remove food odors from the air. If your filter is damaged or strong odors are coming from your microwave, it is best to rep...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
December 8, 2019
We ordered the door handle from parts select (owner-stan crosier) but not clear on how to replace the handle. Does just part #: Ps389953 (inner door frame-black) have to be removed? And if so what is the best way to remove it. There are 3 screws on the outside edge of the door which do appear have to come out....thank you
For model number KHMS147HSS1
Hello Michael and thanks for writing.
For your convenience, we have included a link to repair instructions. Good luck with your repair.
https://homeguides.sfgate.com/replace-broken-handles-microwave-ovens-66957.html
Was this helpful?
Thank you for voting!
Michael Meyer
December 8, 2019
Sorry...this is a follow-up email. I've read conflicting directions about replacing the handle. Does the outer door cover need to be removed or just the black plastic piece (part #: ps389953)....thank you again
For model number KHMS147HSS1
Hi Michael, we do not have the exact instructions for this model, however looking at the diagram it appears only the first door cover/trim needs to be removed. Thank you for your question and good luck with your repair!
Slide grease filter about 1/2 inch to right (or left) using the d-ring attached to one side and then pull down and out. Push charcoal filter frame slightly to rear and pry down from front. Install new charcoal and grease filters by reversing process. No tools - 5-minutes max!!
