This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
This hinge is located on each side of the oven door. Sold individually.
$161.18
In Stock
Questions And Answers for KGST307HBT9
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
January 6, 2020
The control panel light randomly doesn't work. I have cut the power for several minutes and sometimes it works and most often it doesn't. Also of note, the oven runs without the light and the panel chimes when buttons are pushed...also without the panel lights on.
For model number KGST307HBT9
Hello Scott and thank you for writing.
It truly sounds like one of the electronic boards is starting to fail. As there are several possibilities, you would have to get the boards tested by a service repairman or if you have the instruments and know-how you could do it yourself. Here is the part number for the main board PS11747438. We hope this helps. Please contact us anytime if you require further assistance.
What year was the model made?
KitchenAid Superba range
For model number KGST307HBT9
Hello J, thank you for contacting us. Based on our research, your model was manufactured in approximately 2004. To get the exact manufacturing date, please provide us with the complete serial number. We hope this information helps!
Was this helpful?
Thank you for voting!
Joseph
November 19, 2023
How do you take the oven door off?
For model number KGST307HBT9
Hello Joseph, thank you for your question! Open the door to the broil stop position (open about 4" [10 cm]). Lift the door slightly and pull out and back until hinges come out to the catch position. Push the door down and pull straight out to remove the door completely. We hope this is helpful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installing the parts together. Relatively easy process as long as you remember where the parts go. When in doubt, I had to refer to the pictorial of the disassembled door shown on your website.
The only real issue was locating the proper adhesive to ensure that the new pads would not fall out. The small insert paper slip in the package noted that a RTV adhesive should be used. After much searching at the home improvement super store, I learned it would be found at an auto supply store. It is black, and is for high temp use. It is available in a small tube for around $2.00. The RTV is usually used to make gaskets for heat/oil exposure in auto repair. I did have trouble removing a broken stub from a pad that had broken off in the hole. I used an awl to get what I could and push the rest into the hole deeper, then insert a new pad with along with the adhesive.
I removed bottom drawer of the kitchen aid oven.I could see the gas valve.I opened the door of the oven and removed plate on bottom of the oven .there was no screws holding it down ,I removed a couple of screw for the burner and took out 2 screws for the heating element . In the back of the oven .there is 2 wires .one goes to the gas valve located behind the bottom draw.you know can see it from the front with the draw removed,than move the oven out and take the 4 screws holding the back plate .you will see the other wire the element plugs into .you unplug 2 wires and a few screws and you are done.you save alot of money and since this happens alot .you can compare this to changinging a light bulb.It needs maintence from time to time.